Items where Author is "Rani, A.M.A."

Group by: Item Type | No Grouping

Number of items: 48.

Subramanim, K. and Sriraman and Amirtham, V. and Rani, A.M.A. and Ali, S. and Perumal, T. (2023) Review of Current Development of Knee Rehabilitation Device Using Series Elastic Actuator (SEA). Lecture Notes in Mechanical Engineering. pp. 965-980. ISSN 21954356

Shukor, J.â��A. and Razak, M.A.-H.A. and Hassan, A. and Jamian, R. and Rani, A.M.A. (2022) Determining the Alternative Type of Wood for Class a Fire Crib Test According to UL 2166 Standards. Advanced Structured Materials, 162. pp. 19-27.

Ali, S. and Irfan, M. and Niazi, U.M. and Rani, A.M.A. and Rashedi, A. and Rahman, S. and Khan, M.K.A. and Alsaiari, M.A. and Legutko, S. and PetrÅ¯, J. and Trefil, A. (2022) Microstructure and Mechanical Properties of Modified 316L Stainless Steel Alloy for Biomedical Applications Using Powder Metallurgy. Materials, 15 (8).

Al-Amin, N.A.-B.M.N. and Rani, A.M.A. and Awang, M.N. and Rani, M.N.A. and Ishar, N.A. and Thompson, H.M. and Hassan, M.H. and Zakir, B.M. and Hassan, A.T. (2021) Simulation-enabled design and analysis of globe valve. In: UNSPECIFIED.

Rao, T.V.V.L.N. and Rani, A.M.A. and Mohamed, N.M. and Ya, H.H. and Awang, M. and Hashim, F.M. (2021) Stability Analysis of Partial Slip Texture Journal Bearing. Lecture Notes in Mechanical Engineering. pp. 217-225.

Krishnan, S. and Krishna, A. and Nordin, A. and Amirtham, V. and Rani, A.M.A. and Rao, T.V.V.L.N. (2020) Design and Fabrication of a Parallel Mechanism for Foot/Ankle Rehabilitation Therapy. Lecture Notes in Mechanical Engineering. pp. 133-141.

Danish, M. and Yasir, M. and Mia, M. and Nazir, K. and Ahmed, T. and Rani, A.M.A. (2020) High speed machining of magnesium and its alloys. Elsevier, pp. 263-282.

Fua-Nizan, R. and Rani, A.M.A. and Din, M.Y. and Chopra, S. (2020) Preliminary Study of Stress Distribution on Modified Femoral Component of Knee Implant at Maximum Flexion Angle. Lecture Notes in Mechanical Engineering. pp. 17-22.

Nurshafiq Ramli, M. and Rani, A.M.A. and Sallih, N. and Aliyu, A.A.A. and Rao, T.V.V.L.N. (2020) Vibration Analysis Methods for Misalignment and Tolerance Problems in Machine Systems: A Review. Lecture Notes in Mechanical Engineering. pp. 57-66.

Rao, T.V.V.L.N. and Rani, A.M.A. and Mohamed, N.M. and Ya, H.H. and Awang, M. and Hashim, F.M. (2019) Analysis of magnetohydrodynamic partial slip laser bump texture slider and journal bearing. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 233 (12). pp. 1921-1938.

Danish, M. and Ginta, T.L. and Rani, A.M.A. and Carou, D. and Davim, J.P. and Rubaiee, S. and Ghazali, S. (2019) Investigation of surface integrity induced on AZ31C magnesium alloy turned under cryogenic and dry conditions. In: UNSPECIFIED.

Razak, M.A. and Rani, A.M.A. and Saad, N.M. and Littlefair, G. and Aliyu, A.A. (2018) Controlling corrosion rate of Magnesium alloy using powder mixed electrical discharge machining. IOP Conference Series: Materials Science and Engineering, 344 (1).

Ali, S. and Rani, A.M.A. and Altaf, K. and Baig, Z. (2018) Investigation of Boron addition and compaction pressure on the compactibility, densification and microhardness of 316L Stainless Steel. IOP Conference Series: Materials Science and Engineering, 344 (1).

Altaf, K. and Qayyum, J.A. and Rani, A.M.A. and Ahmad, F. and Megat-Yusoff, P.S.M. and Baharom, M. and Aziz, A.R.A. and Jahanzaib, M. and German, R.M. (2018) Performance analysis of enhanced 3D printed polymer molds for metal injection molding process. Metals, 8 (6).

Aliyu, A.A.A. and Rohani, J.M. and Rani, A.M.A. and Musa, H. (2017) Optimization of electrical discharge machining parameters of SiSiC through response surface methodology. Jurnal Teknologi, 79 (1). pp. 119-129.

Pedapati, S.R. and Shasidaran and Kamal, S. and Rani, A.M.A. (2017) Optimum welding parameter for GMA welding using soft computing techniques. AIP Conference Proceedings, 1901.

Rao, T.V.V.L.N. and Rani, A.M.A. and Awang, M. and Hashim, F.M. (2017) Stability evaluation of three-layered journal bearing with slip/partial slip. Industrial Lubrication and Tribology, 69 (3). pp. 334-341.

Danish, M. and Ginta, T.L. and Habib, K. and Carou, D. and Rani, A.M.A. and Saha, B.B. (2017) Thermal analysis during turning of AZ31 magnesium alloy under dry and cryogenic conditions. International Journal of Advanced Manufacturing Technology, 91 (5-8). pp. 2855-2868.

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2016) Analysis of Micropolar and Power Law Fluidâ��Lubricated Slider and Journal Bearing with Partial Slipâ��Partial Slip Texture Configuration. Tribology Transactions, 59 (5). pp. 896-910.

Zain, M.Z.M. and Rani, A.M.A. and Majid, M.A.A. (2016) Analysis of reconfigurable assembly system framing systems in automotive industry. In: UNSPECIFIED.

Altaf, K. and Rani, A.M.A. and Woldemichael, D.E. and Lemma, T.A. and Jian, C.Z. and Fiqri, M.H. (2016) Application of additive manufacturing/3D printing technologies and investment casting for prototype development of polycrystalline diamond compact (PDC) drill bit body. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6514-6518.

Srinivasa Rao, P. and Bawazir, A.F.O. and Awang, M. and Rani, A.M.A. and Jebaraj, S. (2016) Effect of tool geometrical parameters on friction stir welding joint properties of aluminum alloy AA6061. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13053-13058.

Qayyum, J.A. and Altaf, K. and Mahmood, A. and Shah, M. and Rani, A.M.A. (2016) Grain refinement of LM25 Aluminum alloy casting using sloping plate process. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13049-13052.

Rao, T.V.V.L.N. and Rani, A.M.A. and Awang, M. and Hashim, F.M. (2016) Load capacity coefficient evaluation of three-layered journal bearing with slip. Jurnal Teknologi, 78 (6-10). pp. 39-43.

Moayedfar, M. and Rani, A.M.A. and Emamian, S.S. and Haghighizadeh, A. and Jafari, N. (2016) Manufacture of medical orthopaedic implants using computed tomography imaging and rapid prototyping. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 177-180.

Altaf, K. and Rani, A.M.A. and Ahmad, F. and Aslam, M. (2016) Rapid tooling for powder injection moulding process. In: UNSPECIFIED.

Krishnan, S. and Nagarajan, T. and Rani, A.M.A. and Ambaraj, W. and Ramiah, R. (2016) Rehabilitation for foot/ankle - Continuous Passive motion (CPM) using Shape Memory Alloy (SMA) actuated Stewart platform. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12908-12912.

Rao, T.V.V.L.N. and Rani, A.M.A. and Awang, M. and Nagarajan, T. and Hashim, F.M. (2016) Stability analysis of double porous and surface porous layer journal bearing. Tribology - Materials, Surfaces and Interfaces, 10 (1). pp. 19-25.

Rao, T.V.V.L.N. and Rani, A.M.A. and Sufian, S. and Mohamed, N.M. (2015) Analysis of CNT additives in porous layered thin film lubrication with electric double layer. In: UNSPECIFIED.

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2014) Analysis of two-layered film journal bearing with partial slip surface. Advanced Materials Research, 903. pp. 215-220.

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2014) Analysis of two-layered journal bearing lubricated with ferrofluid. In: UNSPECIFIED.

Manikya Kanti, K. and Srinivasa Rao, P. and Ranga Janardhana, G. and Rani, A.M.A. (2014) Mathematical modeling for the prediction of depth of penetration in double pulse GMA welding using fractional factorial method. Applied Mechanics and Materials, 660. pp. 347-351.

Rao, T.V.V.L.N. and Awang, M. and Lias, M.R. and Rani, A.M.A. (2014) Nonlinear analysis of spur gear pair with time-varying mesh stiffness. In: UNSPECIFIED.

Omer, M.A. and Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2014) Pressure distribution in hydrodynamic journal bearing with lubricants additives. In: UNSPECIFIED.

Rani, A.M.A. and Hani, A.F.M. and El-Tegani, N. and Chong, E. and Sagar, A. (2014) Quantitative assessment of ulcer wound volume. CRC Press, pp. 219-272.

Altaf, K. and Rani, A.M.A. (2014) Thermal conductivity augmentation of epoxy injection moulds for cooling time reduction. In: UNSPECIFIED.

This list was generated on Sun Nov 24 01:19:43 2024 +08.