Items where Author is "Liew, M.S."

Group by: Item Type | No Grouping

Number of items: 170.

Bheel, N. and Mohammed, B.S. and Liew, M.S. and Zawawi, N.A.W.A. (2023) Durability Behaviours of Engineered Cementitious Composites Blended with Carbon Nanotubes against Sulphate and Acid Attacks by Applying RSM Modelling and Optimization. Buildings, 13 (8). ISSN 20755309

Bheel, N. and Mohammed, B.S. and Liew, M.S. and Zawawi, N.A.W.A. (2023) Effect of Graphene Oxide as a Nanomaterial on the Durability Behaviors of Engineered Cementitious Composites by Applying RSM Modelling and Optimization. Buildings, 13 (8). ISSN 20755309

Al-Yacouby, A.M. and Ahmed, M.M. and Liew, M.S. (2023) The Effects of Double-Side Curved Baffle Height on the Liquid Sloshing of a Spherical Tankâ��Numerical Study. Lecture Notes in Mechanical Engineering. pp. 55-69.

Bheel, N. and Mohammed, B.S. and Abdulkadir, I. and Liew, M.S. and Zawawi, N.A.W.A. (2023) Effects of Graphene Oxide on the Properties of Engineered Cementitious Composites: Multi-Objective Optimization Technique Using RSM. Buildings, 13 (8). ISSN 20755309

Aswin, M. and Al-Fakih, A. and Syed, Z.I. and Liew, M.S. (2023) Influence of Different Dapped-End Reinforcement Configurations on Structural Behavior of RC Dapped-End Beam. Buildings, 13 (1).

Giri, Y.G.A.L.P. and Mohammed, B.S. and Liew, M.S. and Zawawi, N.A.W.A. and Abdulkadir, I. and Singh, P. and Ravindran, G. (2023) Mechanical and Microstructural Properties of Rubberized Geopolymer Concrete: Modeling and Optimization. Buildings, 13 (8). ISSN 20755309

Al-Yacouby, A.M. and Ahmed, M.M. and Liew, M.S. (2023) Numerical Study on the Effects of Sloshing in a Spherical Tank Using Double-Side Curved Baffle. Lecture Notes in Mechanical Engineering. pp. 33-45.

Al-Awag, A.M. and Alaloul, W.S. and Liew, M.S. and Baarimah, A.O. and Musarat, M.A. (2023) The potential role of industrialized building systems (IBS) in Malaysian sustainable construction: Awareness and barriers. In: UNSPECIFIED.

Danyaro, K.U. and Hussain, H.H. and Abdullahi, M. and Liew, M.S. and Shawn, L.E. and Abubakar, M.Y. (2022) Development and Integration of Metocean Data Interoperability for Intelligent Operations and Automation Using Machine Learning: A Review. Applied Sciences (Switzerland), 12 (11).

Abdulkadir, I. and Mohammed, B.S. and Liew, M.S. and Wahab, M.M.A. (2022) Effect of Graphene Oxide and Crumb Rubber on the Drying Shrinkage Behavior of Engineered Cementitious Composite (ECC): Experimental Study, RSMâ��Based Modelling and Optimization. Lecture Notes in Civil Engineering, 179. pp. 29-42.

Al-Yacouby, A.M. and Mazli, A.A. and Liew, M.S. and Ratnayake, R.M.C. and Samarakoon, S.M.K. (2022) Finite Element Analysis of Steel Plates with Rectangular Openings Subjected to Axial Stress. Materials, 15 (13).

Appana, P.M. and Mohammed, B.S. and Abdulkadir, I. and Ali, M.O.A. and Liew, M.S. (2022) Mechanical, Microstructural and Drying Shrinkage Properties of NaOH-Pretreated Crumb Rubber Concrete: RSM-Based Modeling and Optimization. Materials, 15 (7).

Alsubal, S. and Liew, M.S. and Shawn, L.E. (2022) Preliminary Design and Dynamic Response of Multi-Purpose Floating Offshore Wind Turbine Platform: Part 1. Journal of Marine Science and Engineering, 10 (3).

Danyaro, K.U. and Liew, M.S. (2022) Semantic Web for Meteorological and Oceanographic Data. In: UNSPECIFIED.

Mohsen Alawag, A. and Salah Alaloul, W. and Liew, M.S. and Ali Musarat, M. and Baarimah, A.O. and Saad, S. and Ammad, S. (2022) Total quality management in industrialised building system: Implementation and benefits in construction projects. Ain Shams Engineering Journal.

Baarimah, A.O. and Alaloul, W.S. and Liew, M.S. and Kartika, W. and Al-Sharafi, M.A. and Musarat, M.A. and Alawag, A.M. and Qureshi, A.H. (2022) A bibliometric analysis and review of building information modelling for post-disaster reconstruction. Sustainability (Switzerland), 14 (1).

Irawan, R. and Azizan, N.L. and Liew, M.S. and Al-Yacouby, A.M. and Danyaro, K.U. (2021) Analysis of Spread Moored FPSO-Tanker Side-by-Side System with Offloading Operability. Lecture Notes in Mechanical Engineering. pp. 309-317.

Mohammed, B.S. and Al-Fakih, A. and Liew, M.S. (2021) Characteristics of interlocking concrete bricks incorporated crumb rubber and fly ash. Lecture Notes in Civil Engineering, 132. pp. 631-639.

Musarat, M.A. and Alaloul, W.S. and Liew, M.S. (2021) Construction machinery hire rates deviation in Malaysia: an inflation rate effect analysis. Revista de la Construccion, 20 (1). pp. 91-105.

Baarimah, A.O. and Alaloul, W.S. and Liew, M.S. and Alawag, A.M. and Musarat, M.A. and Alzubi, K.M. (2021) Current State of Post-Disaster Reconstruction Projects: A Bibliometric Analysis. In: UNSPECIFIED.

Mohammed, B.S. and Xian, L.W. and Haruna, S. and Liew, M.S. and Abdulkadir, I. and Zawawi, N.A.W.A. (2021) Deformation Properties of Rubberized Engineered Cementitious Composites Using Response Surface Methodology. Iranian Journal of Science and Technology - Transactions of Civil Engineering, 45 (2). pp. 729-740.

Abdullah, M.S. and Alaloul, W.S. and Liew, M.S. and Musarat, M.A. (2021) Delay and cost overrun of palm oil refinery construction projects: Artificial neural network (ann) model. Lecture Notes in Civil Engineering, 132. pp. 580-589.

Liew, M.S. and Mohammed, B.S. and Danyaro, K.U. and Al-Yacouby, A.M. and Haruna, S. (2021) Effects of quartz powder on the compressive strength of high performance engineered cementitious composites. Lecture Notes in Civil Engineering, 132. pp. 677-684.

Mohd, S.S.R. and Liew, M.S. and Zawaw, N.A.W.A. and Farhan, S.A. and Shafiq, N. (2021) Green-Building-Index-Assessment-Criteria-Based Comparative Evaluation of Interlocking Blocks as an Alternative to Conventional Masonry for Residential Buildings in Malaysia. In: UNSPECIFIED.

Mazlina, M. and Liew, M.S. and Adnan, A. and Harahap, I.S.H. and Hamid, N.H. (2021) Ground response analysis for stiff and soft soil under different earthquake events: A comparison. Lecture Notes in Civil Engineering, 132. pp. 891-898.

Musarat, M.A. and Alaloul, W.S. and Liew, M.S. (2021) Impact of inflation rate on construction projects budget: A review. Ain Shams Engineering Journal, 12 (1). pp. 407-414.

Mohsen, A. and Alaloul, W.S. and Liew, M.S. and Musarat, M.A. and Baarimah, A.O. and Alzubi, K.M. and Altaf, M. (2021) Impact of the COVID-19 Pandemic on Construction Industry in Malaysia. In: UNSPECIFIED.

Alawag, A.M.M. and Alaloul, W.S. and Liew, M.S. and Al-Bared, M.A.M. and Zawawi, N.A.W.A. and Ammad, S. (2021) The Implementation of the Industrialized Building System in the Malaysian Construction Industryâ��a Comprehensive Review. Lecture Notes in Mechanical Engineering. pp. 3-16.

Musarat, M.A. and Alaloul, W.S. and Liew, M.S. (2021) Inflation rate and laboursâ�� wages in construction projects: economic relation investigation. Engineering, Construction and Architectural Management.

Baarimah, A.O. and Alaloul, W.S. and Liew, M.S. and Al-Aidrous, A.-H.M.H. and Alawag, A.M. and Musarat, M.A. (2021) Integration of Building Information Modeling (BIM) and Value Engineering in Construction Projects: A Bibliometric Analysis. In: UNSPECIFIED.

Alaloul, W.S. and Musarat, M.A. and Liew, M.S. and Qureshi, A.H. and Maqsoom, A. (2021) Investigating the impact of inflation on labour wages in Construction Industry of Malaysia. Ain Shams Engineering Journal, 12 (2). pp. 1575-1582.

Abdulkadir, I. and Mohammed, B.S. and Liew, M.S. and Wahab, M.M.A. (2021) Modelling and multi-objective optimization of the fresh and mechanical properties of self-compacting high volume fly ash ECC (HVFA-ECC) using response surface methodology (RSM). Case Studies in Construction Materials, 14.

Abdulkadir, I. and Mohammed, B.S. and Liew, M.S. and Wahab, M.M.A. (2021) Modelling and optimization of the mechanical properties of engineered cementitious composite containing crumb rubber pretreated with graphene oxide using response surface methodology. Construction and Building Materials, 310.

Al-Fakih, A. and Mohammed, B.S. and Liew, M.S. (2021) On rubberized engineered cementitious composites (R-ECC): A review of the constituent material. Case Studies in Construction Materials, 14.

Anwar, A. and Mohammed, B.S. and Wahab, M.B.A. and Muthusamy, K. and Liew, M.S. (2021) Structural Quality of Graphene Oxide Nanosheets on the Basis of Defect Ratio: A Raman Study. Lecture Notes in Mechanical Engineering, 46. pp. 423-439.

Al-Fakih, A. and Mohammed, B.S. and Liew, M.S. and Wahab, M.W.A. and Haruna, S. (2021) Utilizing of crumb rubber derived recycled scrap tires in masonry application: A review. Materials Science Forum, 1030 M. pp. 73-87.

Altaf, M. and Alaloul, W.S. and Khan, S. and Liew, M.S. and Musarat, M.A. and Mohsen, A.A. (2021) Value Analysis in Construction Projects with BIM implementation: A Systematic Review. In: UNSPECIFIED.

Alsubal, S. and Liew, M.S. and Lim, E.S. and Harahap, I.S.H. and Nasser, A.M.M. (2021) The future of wind power in malaysia: A review. Lecture Notes in Civil Engineering, 132. pp. 844-851.

Al-Fakih, A. and Mohammed, B.S. and Wahab, M.M.A. and Liew, M.S. and Mugahed Amran, Y.H. and Alyousef, R. and Alabduljabbar, H. (2020) Characteristic compressive strength correlation of rubberized concrete interlocking masonry wall. Structures, 26. pp. 169-184.

Liew, M.S. and Danyaro, K.U. and Zawawi, N.A.W.A. (2020) A Comprehensive Guide to Different Fracturing Technologies: A Review. Energies, 13 (13).

Wahab, M.M.A. and Kurian, V.J. and Liew, M.S. and Kim, D.K. (2020) Condition Assessment Techniques for Aged Fixed-Type Offshore Platforms Considering Decommissioning: a Historical Review. Journal of Marine Science and Application, 19 (4). pp. 584-614.

Toloue, I. and Liew, M.S. and Hamonangan Harahap, I.S. and Lee, H.E. (2020) Damage detection in frame structures using noisy accelerometers and Damage Load Vectors (DLV). Scientia Iranica, 27 (4 A). pp. 1776-1785.

Patel, M.S. and Liew, M.S. and Mustaffa, Z. and Yee, N.C. and Whyte, A. (2020) Development of downtime cost calculator for offloading operations influenced by parametric rolling. Journal of Marine Science and Engineering, 8 (1).

Patel, M.S. and Liew, M.S. and Mustaffa, Z. and Abdurasheed, A.S. and Whyte, A. (2020) Downtime cost analysis of offloading operations under irregular waves in Malaysian waters. Ocean Systems Engineering, 10 (2). pp. 131-161.

Adamu, M. and Mohammed, B.S. and Shafiq, N. and Liew, M.S. (2020) Durability performance of high volume fly ash roller compacted concrete pavement containing crumb rubber and nano silica. International Journal of Pavement Engineering, 21 (12). pp. 1437-1444.

Mohammed, B.S. and Yen, L.Y. and Haruna, S. and Seng Huat, M.L. and Abdulkadir, I. and Al-Fakih, A. and Liew, M.S. and Abdullah Zawawi, N.A.W. (2020) Effect of elevated temperature on the compressive strength and durability properties of crumb rubber engineered cementitious composite. Materials, 13 (16).

Haruna, S. and Mohammed, B.S. and Wahab, M.M.A. and Liew, M.S. (2020) Effect of paste aggregate ratio and curing methods on the performance of one-part alkali-activated concrete. Construction and Building Materials, 261.

Patel, M.S. and Liew, M.S. and Mustaffa, Z. and Abdurrasheed, A.S. and Whyte, A. (2020) Effects of Motion Responses and Drift Forces on Side-by-Side Offloading Operations of FPSO. Lecture Notes in Mechanical Engineering. pp. 407-413.

Toloue, I. and Liew, M.S. and Harahap, I.S.H. and Lee, H.E. (2020) Experimental evaluation of force analogy method (FAM) by element type. Earthquake Engineering and Engineering Vibration, 19 (1). pp. 137-147.

Azizan, N.L. and Irawan, R. and Liew, M.S. and Al-Yacouby, A.M. and Danyaro, K.U. (2020) Experimental studies of fpso responses with validation by numerical and artificial neural network prediction. Lecture Notes in Mechanical Engineering. pp. 469-482.

Al-Fakih, A. and Wahab, M.M.A. and Mohammed, B.S. and Liew, M.S. and Wan Abdullah Zawawi, N.A. and As'ad, S. (2020) Experimental study on axial compressive behavior of rubberized interlocking masonry walls. Journal of Building Engineering, 29.

Al-Fakih, A. and Mohammed, B.S. and Wahab, M.M.A. and Liew, M.S. and Mugahed Amran, Y.H. (2020) Flexural behavior of rubberized concrete interlocking masonry walls under out-of-plane load. Construction and Building Materials, 263.

Mohamad, M. and Hamid, N.H.A. and Liew, M.S. (2020) Ground response analysis in offshore Terengganu. Malaysian Construction Research Journal, 31 (2). pp. 9-18.

Al-Yacouby, A.M. and Halim, E.R.B.A. and Liew, M.S. (2020) Hydrodynamic analysis of floating offshore solar farms subjected to regular waves. Lecture Notes in Mechanical Engineering. pp. 375-390.

Alaloul, W.S. and Liew, M.S. and Zawawi, N.A.W.A. and Kennedy, I.B. (2020) Industrial Revolution 4.0 in the construction industry: Challenges and opportunities for stakeholders. Ain Shams Engineering Journal, 11 (1). pp. 225-230.

Patel, M.S. and Liew, M.S. and Mustaffa, Z. and Abdurrasheed, A.S. and Whyte, A. (2020) Influence of Partially Standing Waves on Offloading Operations for Shuttle Tanker. Lecture Notes in Mechanical Engineering. pp. 399-406.

Alaloul, W.S. and Musarat, M.A. and Liew, M.S. and Zawawi, N.A.W.A. (2020) Influential Safety Performance and Assessment in Construction Projects: A Review. Lecture Notes in Civil Engineering, 53. pp. 719-728.

Musarat, M.A. and Alaloul, W.S. and Liew, M.S. and Maqsoom, A. and Qureshi, A.H. (2020) Investigating the impact of inflation on building materials prices in construction industry. Journal of Building Engineering, 32.

Al-Yacouby, A.M. and Liew, M.S. (2020) Parametric Study of Hydrodynamic Coefficients for Circular Cylinders at Subcritical Reynolds Number. Lecture Notes in Mechanical Engineering. pp. 217-224.

Mohammed, B.S. and Aswin, M. and Liew, M.S. (2020) Prediction of failure load of RC and R-ECC dapped-end beams. Case Studies in Construction Materials, 13.

Alaloul, W.S. and Liew, M.S. and Zawawi, N.A.W. and Mohammed, B.S. and Adamu, M. and Musharat, M.A. (2020) Structural equation modelling of construction project performance based on coordination factors. Cogent Engineering, 7 (1).

Donghai, H.E. and Liew, M.S. and Ovinis, M. and Danyaro, K.U. (2020) Study on vibration of U-shaped flexible jumpers. Journal of Engineering Science and Technology, 15 (4). pp. 2414-2437.

Alawag, A.M. and Salah Alaloul, W. and Liew, M.S. and Al-Aidrous, A.-H.M.H. and Saad, S. and Ammad, S. (2020) Total Quality Management Practices and Adoption in Construction Industry Organizations: A Review. In: UNSPECIFIED.

Patel, M.S. and Azizan, N. and Liew, M.S. and Mustaffa, Z. and Ali, M.O. and Whyte, A. (2020) A numerical study: Transitional hydrodynamic behaviour of a moored barge in different ultra-shallow water depths of Malaysia. Open Civil Engineering Journal, 13 (1). pp. 238-259.

Anwar, A. and Mohammed, B.S. and Liew, M.S. and Wahab, M.A. and Zawawi, N.A.W.A. (2019) Below-Grade Sulfur Storage Pits in Oil Refineries: A Review. Journal of Failure Analysis and Prevention, 19 (6). pp. 1745-1760.

Patel, M.S. and Liew, M.S. and Mustaffa, Z. and Al-Yacouby, A.M. and Abdurrasheed, A.S. and Whyte, A. (2019) Downtime Cost Analysis of Offloading Operations Considering Vessel Motions and Mooring Responses in Malaysian Waters. In: UNSPECIFIED.

Mohammed, B.S. and Achara, B.E. and Liew, M.S. and Alaloul, W.S. and Khed, V.C. (2019) Effects of elevated temperature on the tensile properties of NS-modified self-consolidating engineered cementitious composites and property optimization using response surface methodology (RSM). Construction and Building Materials, 206. pp. 449-469.

Adamu, M. and Mohammed, B.S. and Liew, M.S. and Alaloul, W.S. (2019) Evaluating the impact resistance of roller compacted concrete containing crumb rubber and nanosilica using response surface methodology and Weibull distribution. World Journal of Engineering, 16 (1). pp. 33-43.

Al-Fakih, A. and Mohammed, B.S. and Liew, M.S. and Nikbakht, E. (2019) Incorporation of waste materials in the manufacture of masonry bricks: An update review. Journal of Building Engineering, 21. pp. 37-54.

Mohammed, B.S. and Haruna, S. and Mubarak bn Abdul Wahab, M. and Liew, M.S. (2019) Optimization and characterization of cast in-situ alkali-activated pastes by response surface methodology. Construction and Building Materials, 225. pp. 776-787.

Mohammed, B.S. and Aswin, M. and Liew, M.S. and Zawawi, N.A.W.A. (2019) Structural Performance of RC and R-ECC Dapped-End Beams Based on the Role of Hanger or Diagonal Reinforcements Combined by ECC. International Journal of Concrete Structures and Materials, 13 (1).

Alaloul, W.S. and Liew, M.S. and Wan Zawawi, N.A. (2018) Communication, coordination and cooperation in construction projects: Business environment and human behaviours. IOP Conference Series: Materials Science and Engineering, 291 (1).

Imran, M. and Liew, M.S. and Garcia, E.M. and Nasif, M.S. and Yassin, A.Y.M. and Niazi, U.M. (2018) Deformation and Heat Transfer on Three Sides Protected Beams under Fire Accident. IOP Conference Series: Earth and Environmental Science, 140 (1).

Mazlina, M. and Liew, M.S. and Adnan, A. and Harahap, I.S.H. and Hamid, N.A. (2018) Determination of Shear Wave Velocity in Offshore Terengganu for Ground Response Analysis. IOP Conference Series: Earth and Environmental Science, 140 (1).

Mohammed, B.S. and Liew, M.S. and S Alaloul, W. and Al-Fakih, A. and Ibrahim, W. and Adamu, M. (2018) Development of rubberized geopolymer interlocking bricks. Case Studies in Construction Materials, 8. pp. 401-408.

Adamu, M. and Mohammed, B.S. and Liew, M.S. (2018) Effect of crumb rubber and nano silica on the creep and drying shrinkage of roller compacted concrete pavement. International Journal of GEOMATE, 15 (47). pp. 58-65.

Mohammed, B.S. and Adamu, M. and Liew, M.S. (2018) Evaluating the effect of crumb rubber and nano silica on the properties of high volume fly ash roller compacted concrete pavement using non-destructive techniques. Case Studies in Construction Materials, 8. pp. 380-391.

Mohammed, B.S. and Adamu, M. and Liew, M.S. (2018) Evaluating the static and dynamic modulus of elasticity of roller compacted rubbercrete using response surface methodology. International Journal of GEOMATE, 14 (41). pp. 186-192.

Syed, Z.I. and Liew, M.S. and Rahman, S.A. and Palaniandy, D.K. (2018) Evaluation of Failure Capacity of Offshore Riser Protectors Under Vessel Impact. Journal of Failure Analysis and Prevention. pp. 1-11.

Chai, K. and Liew, M.S. and Lee, H.E. (2018) Numerical wave tank modelling of regular waves propagation using OpenFOAM. 3rd International Conference on Power Generation Systems and Renewable Energy Technologies, PGSRET 2017, 2018-J. pp. 1-6.

Al-Fakih, A. and Mohammed, B.S. and Liew, M.S. and Alaloul, W.S. (2018) Physical properties of the rubberized interlocking masonry brick. International Journal of Civil Engineering and Technology, 9 (6). pp. 656-664.

Mohammed, B.S. and Liew, M.S. and Alaloul, W.S. and Khed, V.C. and Hoong, C.Y. and Adamu, M. (2018) Properties of nano-silica modified pervious concrete. Case Studies in Construction Materials, 8. pp. 409-422.

Toloue, I. and Liew, M.S. and Harahap, I.S.H. and Lee, H.E. (2018) A novel approach to enhance the accuracy of vibration control of Frames. E3S Web of Conferences, 34.

Liew, M.S. and Danyaro, K.U. and Mohamad, M. and Shawn, L.E. and Aulov, A. (2017) Ground Motion Prediction Equations for Malaysia Due to Subduction Zone Earthquakes in Sumatran Region. IEEE Access, 5. pp. 23920-23937.

Imran, M. and Liew, M.S. and Nasif, M.S. and Niazi, U.M. and Yasreen, A. (2017) Hazard assessment studies on hydrocarbon fire and blast: An overview. Advanced Science Letters, 23 (2). pp. 1243-1247.

Lee, H.E. and Liew, M.S. and Zawawi, N.A.W.A. and Toloue, I. (2017) Heave motion prediction of a large barge in random seas by using artificial neural network. AIP Conference Proceedings, 1905.

Ayilara, A.Q. and Liew, M.S. (2017) Impact of the Overloading of Heavy Goods Vehicles on the Fatigue Life of Steel Bridges. Structures Congress 2017: Bridges and Transportation Structures - Selected Papers from the Structures Congress 2017. pp. 434-445.

Teo, W. and Hing, K.L.M. and Liew, M.S. (2017) Interaction between internal shear reinforcement and external FRP systems of RC beams: Experimental study. Open Civil Engineering Journal, 11. pp. 143-152.

Lun, N.K. and Liew, M.S. and Matori, A.N. and Zawawi, N.A.W.A. (2017) Recent developments in machine learning applications in landslide susceptibility mapping. AIP Conference Proceedings, 1905.

Mardi, N.H. and Malek, M.A. and Liew, M.S. (2017) Tsunami simulation due to seaquake at Manila Trench and Sulu Trench. Natural Hazards, 85 (3). pp. 1723-1741.

Na, K.L. and Lee, H.E. and Liew, M.S. and Wan Abdullah Zawawi, N.A. (2017) An expert knowledge based decommissioning alternative selection system for fixed oil and gas assets in the South China Sea. Ocean Engineering, 130. pp. 645-658.

Ezechi, E.H. and Kutty, S.R.B.M. and Isa, M.H. and Liew, M.S. (2016) Application of response surface methodology for the optimization of hexavalent chromium removal using a new low-cost adsorbent. Desalination and Water Treatment, 57 (47). pp. 22507-22518.

Lee, H.E. and Liew, M.S. and Mardi, N.H. and Na, K.L. and Toloue, I. and Wong, S.K. (2016) Development of jacket platform tsunami risk rating system in waters offshore North Borneo. Journal of Marine Science and Application, 15 (3). pp. 307-320.

Alaloul, W.S. and Liew, M.S. and Zawawi, N.A.W.A. (2016) Identification of coordination factors affecting building projects performance. Alexandria Engineering Journal, 55 (3). pp. 2689-2698.

Yazid, E. and Liew, M.S. and Parman, S. and Kurian, V.J. (2016) Identification of transfer functions from surge motion response of a semisubmersible platform using time-varying NARX model. Applied Ocean Research, 54. pp. 53-66.

Kurian, V.J. and Goh, S.S. and Wahab, M.M.A. and Liew, M.S. (2015) Component reliability assessment of offshore jacket platforms. Research Journal of Applied Sciences, Engineering and Technology, 9 (1). pp. 1-10.

Kurian, V.J. and Al-Yacouby, A.M. and Sebastian, A.A. and Liew, M.S. and Idichandy, V.G. (2015) Effect of sacrificial anodes and marine growth on hydrodynamic coefficients of rigid cylinders. In: UNSPECIFIED.

Imran, M. and Liew, M.S. and Nasif, M.S. (2015) Experimental studies on fire for offshore structures and its limitations: A review. Chemical Engineering Transactions, 45. pp. 1951-1956.

Kim, D.K. and Choi, H.S. and Shin, C.S. and Liew, M.S. and Yu, S.Y. and Park, K.S. (2015) Fatigue performance of deepwater SCR under short-term VIV considering various S-N curves. Structural Engineering and Mechanics, 53 (5). pp. 881-896.

Yazid, E. and Liew, M.S. and Parman, S. and Kurian, V.J. (2015) Identification of slow drift motions of a truss spar platform using parametric Volterra model. Ocean Engineering, 109. pp. 654-668.

Yazid, E. and Liew, M.S. and Parman, S. and Kurian, V.J. (2015) Improving the modeling capacity of Volterra model using evolutionary computing methods based on Kalman smoother adaptive filter. Applied Soft Computing Journal, 35. pp. 695-707.

Khan, R.A. and Liew, M.S. and Zawawi, N.A.W.A. (2015) Impulse response analysis for Malaysian construction sector by vector error correction model. Malaysian Construction Research Journal, 16 (1). pp. 1-14.

Kim, D.K. and Liew, M.S. and Yu, S.Y. and Park, K.S. and Choi, H.S. (2015) Method for estimating soft clay type seabed embedment by pipeline movement. In: UNSPECIFIED.

Aswin, M. and Mohammed, B.S. and Liew, M.S. and Syed, Z.I. (2015) Prediction of RC beams failure load using non-linear finite element analysis. International Journal of Applied Engineering Research, 10 (22). pp. 42974-42980.

Aswin, M. and Mohammed, B.S. and Liew, M.S. and Syed, Z.I. (2015) Root cause of reinforced concrete dapped-end beams failure. International Journal of Applied Engineering Research, 10 (22). pp. 42927-42933.

Aswin, M. and Mohammed, B.S. and Liew, M.S. and Syed, Z.I. (2015) Shear Failure of RC Dapped-End Beams. Advances in Materials Science and Engineering, 2015.

Liew, M.S. and Nordin, A.H. and Lim, E.S. and Zawawi, N.A.W.A. (2015) Wave energy spectrum for the south China sea. Marine Technology, 52 (3). pp. 15-18.

Jaafar, J. and Danyaro, K.U. and Liew, M.S. (2015) Web intelligence: A fuzzy knowledge-based framework for the enhancement of querying and accessing web data. IGI Global, pp. 83-104.

Alaloul, W.S. and Liew, M.S. and Wan Abdullah Zawawi, N.A. (2015) The characteristics of coordination process in construction projects. In: UNSPECIFIED.

Liew, M.S. and Zawawi, N.A.W.A. (2015) The decommissioning challenge. Marine Technology, 52 (3). pp. 50-54.

Kurian, V.J. and Ng, C.Y. and Liew, M.S. (2015) An experimental investigation of the responses of classic spar platform subjected to bi-directional waves. Research Journal of Applied Sciences, Engineering and Technology, 9 (1). pp. 11-17.

Waris, M. and Liew, M.S. and Faris, M. and Idrus, A. (2015) An exploratory study on enablers and barriers for onsite mechanisation in the Malaysian construction industry. Malaysian Construction Research Journal, 16 (1). pp. 15-30.

Kurian, V.J. and Ng, C.Y. and Liew, M.S. (2015) A numerical and experimental study on motion responses of semi-submersible platforms subjected to short-crested waves. Journal of Vibration Engineering and Technologies, 3 (3). pp. 331-344.

Syed, Z.I. and Palaniandy, D.K. and Liew, M.S. (2014) Damage assessment of offshore riser-guards under accidental vessel impact. In: UNSPECIFIED.

Nizamani, Z. and Kurian, V.J. and Liew, M.S. (2014) Determination of environmental load factors for ISO 19902 code in offshore Malaysia using FORM structural reliability method. Ocean Engineering, 92. pp. 31-43.

Kurian, V.J. and Al-Yacouby, A.M. and Sebastian, A.A. and Liew, M.S. and Idichandy, V.G. (2014) Hydrodynamic coefficients for array of tubular cylinders. In: UNSPECIFIED.

Danyaro, K.U. and Jaafar, J. and Liew, M.S. (2014) MetOcean data to linked data. In: UNSPECIFIED.

Yazid, E. and Liew, M.S. and Parman, S. and Kurian, V.J. and Ng, C.Y. (2014) Nonlinear system identification via basis functions based time domain volterra model. In: UNSPECIFIED.

Yazid, E. and Liew, M.S. and Parman, S. and Kurian, V.J. and Ng, C.Y. (2014) Prediction of surge motion response of floating structure using kalman smoother adaptive filters based time-domain volterra model. Applied Mechanics and Materials, 660. pp. 799-803.

Albarody, T.M.B. and Mustaffa, Z.B. and Liew, M.S. (2014) Smart and robust composite tube columns frames for offshore sub-structure construction. Advanced Materials Research, 983. pp. 11-15.

Rahman, S.A. and Syed, Z.I. and John, K.V. and Liew, M.S. (2014) Structural response of offshore blast walls under accidental explosion. Advanced Materials Research, 1043. pp. 278-282.

Kurian, V.J. and Voon, M.C. and Wahab, M.M.A. and Liew, M.S. (2014) System reliability assessment of existing jacket platforms in Malaysian waters. Research Journal of Applied Sciences, Engineering and Technology, 8 (23). pp. 2305-2314.

Kim, D.K. and Liew, M.S. and Youssef, S.A.M. and Mohd, M.H. and Kim, H.B. and Paik, J.K. (2014) Time-Dependent Ultimate Strength Performance of Corroded FPSOs. Arabian Journal for Science and Engineering, 39 (11). pp. 7673-7690.

Kurian, V.J. and Sebastian, A.A. and Al-Yacouby, A.M. and Liew, M.S. and Idichandy, V.G. (2014) Wave forces on linear arrays of rigid vertical circular cylinders in regular waves. Research Journal of Applied Sciences, Engineering and Technology, 7 (24). pp. 5249-5257.

Albarody, T.M.B. and Bt Mustaffa, Z. and Liew, M.S. and Toloue, I. and Setvati, M.R. (2014) A composite steel plate shear walls for offshore constructions. In: UNSPECIFIED.

Liew, M.S. and Halim, A. (2013) Fiber Resin Matrix Composites - A Nature's Gift. In: 3rd International Conference on Management of Natural Resources, Sustainable Development & Ecological Hazards.

Wan Abdullah Zawawi, N.A. and Liew, M.S. and Na, K.L. and Idrus, H. (2013) Engineering the civil engineering education: A capstone case study in a Malaysian university. In: UNSPECIFIED.

Yew, G.Z. and Lim, E.S. and Liew, M.S. and Ng, C.Y. (2013) System identification of a six-legged semisubmersible subjected to wave loads through frequency domain analysis. Applied Mechanics and Materials, 373-37. pp. 770-784.

This list was generated on Wed Nov 27 17:32:01 2024 +08.