Items where Author is "Kim, D.K."

Group by: Item Type | No Grouping

Number of items: 54.

Sivaprasad, H. and Lekkala, M.R. and Latheef, M. and Seo, J. and Yoo, K. and Jin, C. and Kim, D.K. (2023) Fatigue damage prediction of top tensioned riser subjected to vortex-induced vibrations using artificial neural networks. Ocean Engineering, 268.

Lekkala, M.R. and Latheef, M. and Jung, J.H. and Kim, Y.T. and Kim, D.K. (2022) Fatigue damage assessment of offshore riser subjected to vortex-induced vibrations by SHEAR7. International Journal of Naval Architecture and Ocean Engineering, 14.

Kim, D.K. and Li, S. and Lee, J.R. and Poh, B.Y. and Benson, S. and Cho, N.-K. (2022) An empirical formula to assess ultimate strength of initially deflected plate: Part 1 = propose the general shape and application to longitudinal compression. Ocean Engineering, 252.

Kim, D.K. and Li, S. and Yoo, K. and Danasakaran, K. and Cho, N.-K. (2022) An empirical formula to assess ultimate strength of initially deflected plate: Part 2 = combined longitudinal compression and lateral pressure. Ocean Engineering, 252.

Kim, D.K. and Ban, I. and Poh, B.Y. and Shin, S.-C. (2022) A useful guide of effective mesh-size decision in predicting the ultimate strength of flat- and curved plates in compression. Journal of Ocean Engineering and Science.

Latheef, M. and Kim, D.K. (2021) Directional spreading resolution from point measurements for mixed seas and sea states with frequency dependent spreading. Ocean Engineering, 229.

Lekkala, M.R. and Latheef, M. and Kim, D.K. and Wahab, M.B.A. (2021) Numerical assessment of flow around circular cylinder. Lecture Notes in Civil Engineering, 132. pp. 289-301.

Mustaffa, Z. and Halim, A.H.A. and Kim, D.K. and van Gelder, P.H.A.J.M. (2021) Reliability assessment of the vertical well system subjected to erosion and tubing failure. Ships and Offshore Structures, 16 (2). pp. 127-134.

Wahab, M.M.A. and Kurian, V.J. and Liew, M.S. and Kim, D.K. (2020) Condition Assessment Techniques for Aged Fixed-Type Offshore Platforms Considering Decommissioning: a Historical Review. Journal of Marine Science and Application, 19 (4). pp. 584-614.

Kim, S.W. and Lee, S.J. and Kim, Y.T. and Kim, D.K. (2020) Investigation of the refined safety factor for berthing energy calculation. Structural Engineering and Mechanics, 75 (6). pp. 785-797.

Kim, D.K. and Yu, S.Y. and Lim, H.L. and Cho, N.-K. (2020) Ultimate compressive strength of stiffened panel: An empirical formulation for flat-bar type. Journal of Marine Science and Engineering, 8 (8).

Kim, D.K. and Wong, E.W.C. and Cho, N.-K. (2020) An advanced technique to predict time-dependent corrosion damage of onshore, offshore, nearshore and ship structures: Part I = generalisation. International Journal of Naval Architecture and Ocean Engineering, 12. pp. 657-666.

Kim, D.K. and Lim, H.L. and Cho, N.-K. (2020) An advanced technique to predict time-dependent corrosion damage of onshore, offshore, nearshore and ship structures: Part II = Application to the ship's ballast tank. International Journal of Naval Architecture and Ocean Engineering, 12. pp. 645-656.

Lekkala, M.R. and Mohamed, L. and Hafiz, M.F.U. and Kim, D.K. (2020) A practical technique for hydrodynamic coefficients modification in SHEAR7 for fatigue assessment of riser buoyancy modules under vortex-induced vibration. Ocean Engineering, 217.

Topa, A. and Cerik, B.C. and Kim, D.K. (2020) A useful manufacturing guide for rotary piercing seamless pipe by ALE method. Journal of Marine Science and Engineering, 8 (10). pp. 1-24.

Shah, S.M.H. and Mustaffa, Z. and Martinez-Gomariz, E. and Kim, D.K. and Yusof, K.W. (2019) Criterion of vehicle instability in floodwaters: past, present and future. International Journal of River Basin Management.

Mohd, M.H. and Zalaya, M.A. and Latheef, M. and Choi, H.S. and Rahman, M.A.A. and Kim, D.K. (2019) Ultimate bending capacity of aged fixed platform by considering the effect of marine fouling. Latin American Journal of Solids and Structures, 16 (5).

Kim, D.K. and Wong, E.W.C. and Lee, E.B. and Yu, S.Y. and Kim, Y.T. (2019) A method for the empirical formulation of current profile. Ships and Offshore Structures, 14 (2). pp. 176-192.

Kim, D.K. and Wong, E.W.C. and Lekkala, M.K.R. (2019) A parametric study on fatigue of a top-tensioned riser subjected to vortex-induced vibrations. Structural Monitoring and Maintenance, 6 (4). pp. 365-387.

Seo, J.H. and Kim, D.K. and Choi, H.S. and Yu, S.Y. and Park, K.S. (2018) Simplified Technique for Predicting Offshore Pipeline Expansion. Journal of Marine Science and Application. pp. 1-11.

Kim, D.K. and Wong, E.W.C. and Lee, E.B. and Yu, S.Y. and Kim, Y.T. (2018) A method for the empirical formulation of current profile. Ships and Offshore Structures. pp. 1-17.

Kim, D.K. and Incecik, A. and Choi, H.S. and Wong, E.W.C. and Yu, S.Y. and Park, K.S. (2018) A simplified method to predict fatigue damage of offshore riser subjected to vortex-induced vibration by adopting current index concept. Ocean Engineering, 157. pp. 401-411.

Yu, S.Y. and Choi, H.S. and Park, K.S. and Kim, Y.T. and Kim, D.K. (2017) Advanced procedure for estimation of pipeline embedment on soft clay seabed. Structural Engineering and Mechanics, 62 (4). pp. 381-389.

Lai, K.X. and Kim, D.K. and Chin Wong, E.W. (2017) Effect of vortex induced vibration on fatigue damage of top-tensioned riser subjected to current load. ARPN Journal of Engineering and Applied Sciences, 12 (16). pp. 4796-4803.

Kim, D.K. and Zalaya, M.A. and Mohd, M.H. and Choi, H.S. and Park, K.S. (2017) Safety assessment of corroded jacket platform considering decommissioning event. International Journal of Automotive and Mechanical Engineering, 14 (3). pp. 4462-4485.

Kim, D.K. and Lim, H.L. and Kim, M.S. and Hwang, O.J. and Park, K.S. (2017) An empirical formulation for predicting the ultimate strength of stiffened panels subjected to longitudinal compression. Ocean Engineering, 140. pp. 270-280.

Jiwa, M.Z. and Kim, D.K. and Mustaffa, Z. and Choi, H.S. (2017) A systematic approach to pipe-in-pipe installation analysis. Ocean Engineering, 142. pp. 478-490.

Youssef, S.A.M. and Faisal, M. and Seo, J.K. and Kim, B.J. and Ha, Y.C. and Kim, D.K. and Paik, J.K. and Cheng, F. and Kim, M.S. (2016) Assessing the risk of ship hull collapse due to collision. Ships and Offshore Structures, 11 (4). pp. 335-350.

Setvati, M.R. and Mustaffa, Z. and Isnadi, B. and Shafiq, N. and Syed, Z.I. and Kim, D.K. (2016) Meso-scale numerical study of composite patch repaired hole drilled steel plate. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1724-1728.

Park, K.S. and Kim, Y.T. and Kim, D.K. and Yu, S.Y. and Choi, H.S. (2016) A new method for strake configuration design of Steel Catenary Risers. Ships and Offshore Structures, 11 (4). pp. 385-404.

Kim, D.K. and Choi, H.S. and Shin, C.S. and Liew, M.S. and Yu, S.Y. and Park, K.S. (2015) Fatigue performance of deepwater SCR under short-term VIV considering various S-N curves. Structural Engineering and Mechanics, 53 (5). pp. 881-896.

Kim, D.K. and Liew, M.S. and Yu, S.Y. and Park, K.S. and Choi, H.S. (2015) Method for estimating soft clay type seabed embedment by pipeline movement. In: UNSPECIFIED.

Yu, S.Y. and Choi, H.S. and Lee, S.K. and Park, K.-S. and Kim, D.K. (2015) Nonlinear soil parameter effects on dynamic embedment of offshore pipeline on soft clay. International Journal of Naval Architecture and Ocean Engineering, 7 (2). pp. 227-243.

Park, D.K. and Kim, D.K. and Park, C.-H. and Park, D.H. and Jang, B.S. and Kim, B.J. and Paik, J.K. (2015) On the crashworthiness of steel-plated structures in an arctic environment: An experimental and numerical study. Journal of Offshore Mechanics and Arctic Engineering, 137 (5).

Bin Mohd, M.H. and Kim, D.W. and Lee, B.J. and Kim, D.K. and Seo, J.K. and Paik, J.K. (2014) On the burst strength capacity of an aging subsea gas pipeline. Journal of Offshore Mechanics and Arctic Engineering, 136 (4).

Kim, D.K. and Liew, M.S. and Youssef, S.A.M. and Mohd, M.H. and Kim, H.B. and Paik, J.K. (2014) Time-Dependent Ultimate Strength Performance of Corroded FPSOs. Arabian Journal for Science and Engineering, 39 (11). pp. 7673-7690.

Park, D.K. and Paik, J.K. and Kim, B.J. and Seo, J.K. and Li, C.G. and Kim, D.K. (2014) Ultimate strength performance of Northern sea going non-ice class commercial ships. Structural Engineering and Mechanics, 52 (3). pp. 613-632.

Kim, D.K. and Kim, H.B. and Zhang, X. and Li, C.G. and Paik, J.K. (2014) Ultimate strength performance of tankers associated with industry corrosion addition practices. International Journal of Naval Architecture and Ocean Engineering, 6 (3). pp. 507-528.

Kim, D.K. and Paik, J.K. (2014) Ultimate strength performance of tankers with various corrosion additions. Naval Architect (JUL-AU). pp. 54-56.

This list was generated on Sat Nov 23 23:36:33 2024 +08.