Items where Author is "Kakooei, S."

Group by: Item Type | No Grouping

Number of items: 43.

Shahrestani, S. and Beheshti, M. and Kakooei, S. (2022) Investigation of Electrochemical Parameters on Cost-Effective Zn/Ni-Based Electrocatalysts for Electrochemical CO2Reduction Reaction to SYNGAS(H2+CO). Journal of the Electrochemical Society, 169 (4).

Fooladi, E. and Razavizadeh, B.B.M. and Noori, M. and Kakooei, S. (2020) Application of carboxylic acid-functionalized of graphene oxide for electrochemical simultaneous determination of tryptophan and tyrosine in milk. SN Applied Sciences, 2 (4).

Kumar, S.S. and Kakooei, S. and Ismail, M.C. and Haris, M. (2020) Effect of bath temperature on sodium diethyldithiocarbamate trihydrate loading of halloysite nanotube. In: UNSPECIFIED.

Rouhi, J. and Kakooei, S. and Sadeghzadeh, S.M. and Rouhi, O. and Karimzadeh, R. (2020) Highly efficient photocatalytic performance of dye-sensitized K-doped ZnO nanotapers synthesized by a facile one-step electrochemical method for quantitative hydrogen generation. Journal of Solid State Electrochemistry, 24 (7). pp. 1599-1606.

Soleimani, H. and Ali, H. and Yahya, N. and Guan, B.H. and Sabet, M. and Lee, K.C. and Dehzangi, A. and Kakooei, S. (2020) Transport modelling of multi-phase fluid flow in porous media for enhanced oil recovery. Defect and Diffusion Forum, 400. pp. 38-44.

Dzulkifli, H. and Mustapha, M. and Sallih, N. and Kakooei, S. and Mustapha, F. (2020) The effect of reaction temperature on the formation of 2H-SiC and 3C-SiC nanowhiskers. Engineering Solid Mechanics, 8 (4). pp. 381-388.

Meyghani, B. and Awang, M.B. and Poshteh, R.G.M. and Momeni, M. and Kakooei, S. and Hamdi, Z. (2019) The Effect of Friction Coefficient in Thermal Analysis of Friction Stir Welding (FSW). In: UNSPECIFIED.

Asadpour, R. and Sapari, N.B. and Hasnain Isa, M. and Kakooei, S. (2019) Further study of adsorption of crude oils onto acetylated corn silk and its kinetics and equilibrium isotherm. International Journal of Engineering, Transactions B: Applications, 32 (2). pp. 284-291.

Zahidah, K.A. and Kakooei, S. and Ismail, M.C. and Mohebbi, H. and Joshaghani, A.H. and Ghasemi, M. and Eng, K.K. (2019) Smart anticorrosive coatings containing corrosion inhibitor-loaded halloysite nanotubes. Elsevier, pp. 425-447.

Adham Adnan, M. and Kee, K.-E. and Raja, P.B. and Ismail, M.C. and Kakooei, S. (2018) Influence of Heat Treatment on the Corrosion of Carbon Steel in Environment Containing Carbon Dioxide and Acetic Acid. IOP Conference Series: Materials Science and Engineering, 370 (1).

Beheshti, M. and Ismail, M.C. and Kakooei, S. and Shahrestani, S. and Mohan, G. and Zabihiazadboni, M. (2018) Influence of deposition temperature on the corrosion resistance of electrodeposited zinc-nickel alloy coatings: Einfluss der Abscheidetemperatur auf die KorrosionsbestÃ¤ndigkeit von galvanisch aufgebrachten Zink-Nickel-Beschichtungen. Materialwissenschaft und Werkstofftechnik, 49 (4). pp. 472-482.

Beheshti, M. and Zabihiazadboni, M. and Ismail, M.C. and Kakooei, S. and Shahrestani, S. (2018) Investigation on Simultaneous Effects of Shot Peen and Austenitizing Time and Temperature on Grain Size and Microstructure of Austenitic Manganese Steel (Hadfield). IOP Conference Series: Materials Science and Engineering, 328 (1).

Shahrestani, S. and Ismail, M.C. and Kakooei, S. and Beheshti, M. and Zabihiazadboni, M. and Zavareh, M.A. (2018) Iridium Oxide pH Sensor Based on Stainless Steel Wire for pH Mapping on Metal Surface. IOP Conference Series: Materials Science and Engineering, 328 (1).

Rozi, F. and Mohebbi, H. and Ismail, M.C. and Kakooei, S. and Ahmadi, M. and Aghasadeghi, A. and Aghasadeghi, A. (2018) Laboratory investigation on the condensation and corrosion rates of top of line corrosion in carbon steel: a case study from pipeline transporting wet gas in elevated temperature. Corrosion Engineering Science and Technology. pp. 1-5.

Ghasemi, M. and Ahmad, A. and Jafary, T. and Azad, A.K. and Kakooei, S. and Wan Daud, W.R. and Sedighi, M. (2017) Assessment of immobilized cell reactor and microbial fuel cell for simultaneous cheese whey treatment and lactic acid/electricity production. International Journal of Hydrogen Energy, 42 (14). pp. 9107-9115.

Zahidah, K.A. and Kakooei, S. and Kermanioryani, M. and Mohebbi, H. and Ismail, M.C. and Raja, P.B. (2017) Benzimidazole-loaded halloysite nanotube as a smart coating application. International Journal of Engineering and Technology Innovation, 7 (4). pp. 243-254.

Rouhi, J. and Kakooei, S. and Ismail, M.C. and Karimzadeh, R. and Mahmood, M.R. (2017) Development of iridium oxide sensor for surface pH measurement of a corroding metal under deposit. International Journal of Electrochemical Science, 12 (11). pp. 9933-9943.

Kakooei, S. and Ismail, M.C. and Raja, B. and Mohebbi, H. and Emamian, S.S. and Moayedfar, M. (2017) Formation of nano-scale FeCO3 protective corrosion product in carbon dioxide-saturated 3 sodium chloride solution. Key Engineering Materials, 740 KE. pp. 3-8.

Emamian, S. and Awang, M. and Yusof, F. and Hussain, P. and Mehrpouya, M. and Kakooei, S. and Moayedfar, M. and Zafar, A. (2017) A review of friction stir welding pin profile. Lecture Notes in Mechanical Engineering. pp. 1-18.

Beheshti, M. and Kakooei, S. and Ismail, M.C. and Shahrestani, S. (2016) Design and implementation of scanning electrochemical microscopy (SECM) for scanning open circuit potential system on damaged coated surfaces. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14299-14302.

Haghanifar, S. and Kakooei, S. and Ismail, M.C. (2016) Electrochemical hydrogen storage characteristics of Mg2-xCxNi (x = 0, 0.1, 0.2, 0.5) alloys prepared by mechanical alloying. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13013-13018.

Bashiri, R. and Mohamed, N.M. and Kait, C.F. and Sufian, S. and Kakooei, S. and Khatani, M. and Gholami, Z. (2016) Optimization hydrogen production over visible light-driven titania-supported bimetallic photocatalyst from water photosplitting in tandem photoelectrochemical cell. Renewable Energy, 99. pp. 960-970.

Dan, N.E. and Tarmizi Othman, M. and Hussain, P. and Amir, N.B. and Kakooei, S. (2016) Quenching and heat treatment of welded duplex stainless steel to avoid intergranular corrosion. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13405-13409.

Zahidah, K.A. and Kakooei, S. and Pang, M.A.S.B.M.R. and Ismail, M.C. and Eng, K.K. and Raja, P.B. and Mustapha, M. (2016) Statistical analysis of effective variable parameters on corrosion rate of X52 carbons steel. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12929-12936.

Johari, M.I.A. and Mustapha, M. and Mamat, O. and Kakooei, S. and Ginta, T.L. and Ismadi, M.Z.P. (2016) The microstructure, physical and mechanical properties of silicon carbide with alumina and yttria as sintering additives. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13300-13304.

Asadpour, R. and Sapari, N.B. and Isa, M.H. and Kakooei, S. and Orji, K.U. (2015) Acetylation of corn silk and its application for oil sorption. Fibers and Polymers, 16 (9). pp. 1830-1835.

Mohamed, N.M. and Bashiri, R. and Chong, F.K. and Sufian, S. and Kakooei, S. (2015) Photoelectrochemical behavior of bimetallic Cu-Ni and monometallic Cu, Ni doped TiO2 for hydrogen production. International Journal of Hydrogen Energy, 40 (40). pp. 14031-14038.

Kakooei, S. and Ismaila, M.C. and Ari-Wahjoedia, B. (2014) Electrodeposition of iridium oxide by cyclic voltammetry: Application of response surface methodology. In: UNSPECIFIED.

Alimanesh, M. and Rouhi, J. and Zainal, N. and Kakooei, S. and Hassan, Z. (2013) Growth of vertically aligned ZnO nanorods arrays by hydrothermal method. Advanced Materials Research, 795. pp. 616-619.

This list was generated on Sat Nov 23 23:46:35 2024 +08.