Items where Author is "Ismail, A."

Aminu, N. and Kutty, S.R.M. and Isa, M.H. and Ismail, A. and Noor, A. and Al-dhawi, B.N.S. and Jagaba, A.H. (2023) Hybrid suspended growth bioreactor system for the nitrification, denitrification, and ammonia removal from beverage industry wastewater: Biokinetic modelling and optimization by response surface methodology. Case Studies in Chemical and Environmental Engineering, 8. ISSN 26660164

Baharudin, B.A. and Mustapha, M. and Ismail, A. and Zulkipli, F.N. and Ayob, F. and Ahmad, A. (2023) Microhardness and Process Parameter Optimization of Friction Stir Welding on an AA5052 Thin Plate. Advanced Structured Materials, 165. pp. 133-141.

Ismail, A. and Al�Hapis Abdul Razak, M. and Mustapha, M. and Zaki Abdullah, M. and Hussain, P. and Mohamed Saat, A. and Ayub, F. and Muaz bin Mohd Faisal, M. (2023) Optimisation of Fe-Al Diffusion Bonding in Air. Lecture Notes in Mechanical Engineering. pp. 955-964.

Baharudin, B.A. and Mustapha, M. and Ismail, A. and Zulkipli, F.N. and Ayob, F. and Ahmad, A. (2023) Residual Stress Optimization of Friction Stir Welding on an AA5052 Thin Plate. Advanced Structured Materials, 165. pp. 143-151.

Baharudin, B.A. and Mustapha, M. and Azman, M.A. and Shamsuddin, A.N. and Ismail, A. and Tuan Anuwa, T.M.N. and Ab Rahman, F. and Ayob, F. and Hamid, D.A. and Rojan, M.A. (2022) The Effect of Process Temperature and Holding Time on Weldability in Diffusion Welding of Duplex Stainless Steels and Marine Grade Steels for Oil and Gas Pipes. Advanced Structured Materials, 167.

Baharudin, B.A. and Ayob, F. and Abdul Rahim, A. and Mustapha, M. and Ismail, A. and Ab Rahman, F. and Ismail, A. (2022) Investigation on the Mechanical and Microstructural Characteristics of Diffusional Bonded Gray Cast Iron and Low Carbon Steel. Advanced Structured Materials, 167. pp. 245-262.

Razak, M.A.A.A. and Ismail, A. and Rahman, F.A. and Baharudin, B.A. and Khalili, M.A. and Rahim, M.Y.M. and Awang, M. (2021) Experimental Study on Self-Supported Friction Stir Welding on AA5083 Plate Butt Joints. Advanced Structured Materials, 147. pp. 293-298.

Lotpy, M.A.M.N. and Ismail, A. and Rahman, F.A. and Puteri Zarina, M.K. and Baharudin, B.A. and Awang, M. and Hamid, D.A. (2021) Optimization of Welding Parameters for Self-Support Friction Stir Welding (SS-FSW) on AA6063 Pipe Joints. Advanced Structured Materials, 147. pp. 299-306.

Ismail, A. and Awang, M. and Zuhir, M.S.M. and Rahman, F.A. and Baharudin, B.A. and Puteri Zarina, M.K. and Hamid, D.A. and Rojan, M.A. and Dahalan, W.M. (2020) Friction Stir Welding on AA5083 Tee Joint in 1F Position. Lecture Notes in Mechanical Engineering. pp. 351-360.

Ismail, A. and Awang, M. and Zuhir, M.S.M. and Rahman, F.A. and Baharudin, B.A. and Puteri Zarina, M.K. and Hamid, D.A. and Rojan, M.A. and Dahalan, W.M. (2020) Friction Stir Welding on AA5083 Tee Joint in 1F Position. Lecture Notes in Mechanical Engineering. pp. 351-360.

Yahya, N. and Nyuk, C.M. and Ismail, A.F. and Hussain, N. and Rostami, A. and Ismail, A. and Ganeson, M. and Ali, A.M. (2020) Inversion algorithm of fiber bragg grating for nanofluid flooding monitoring. Sensors (Switzerland), 20 (4).

Ismail, A. and Chen, H.C. and Faye, I. and Tang, T.B. (2020) Longitudinal effects of common carotid artery stenosis on ocular hemodynamics assessed using laser speckle flowgraphy in a rabbit model. Scientific Reports, 10 (1).

Alhawari, A.R.H. and Almawgani, A.H.M. and Alghamdi, H. and Hindi, A.T. and Saeidi, T. and Ismail, A. (2020) Omega-shaped tag antenna with inductively-coupled feeding using U-shaped stepped-impedance resonators for RFID applications. Applied Computational Electromagnetics Society Journal, 35 (8). pp. 951-961.

Alhawari, A.R.H. and Almawgani, A.H.M. and Alghamdi, H. and Hindi, A.T. and Saeidi, T. and Ismail, A. (2020) Omega-shaped tag antenna with inductively-coupled feeding using U-shaped stepped-impedance resonators for RFID applications. Applied Computational Electromagnetics Society Journal, 35 (8). pp. 951-961.

Mahmood, S.N. and Ishak, A.J. and Saeidi, T. and Alsariera, H. and Alani, S. and Ismail, A. and Soh, A. (2020) Recent Advances in Wearable Antenna Technologies: A Review. Progress In Electromagnetics Research B, 89. pp. 1-27.

Baharudin, B.A. and Hussain, P. and Mustapha, M. and Ayob, F. and Ismail, A. and Ab Rahman, F. and Khalid, P.Z.M. and Hamid, D.A. and Rojan, M.A. (2020) Tensile Properties of Diffusion Bonded Duplex Stainless Steel to Low Carbon Steel. Lecture Notes in Mechanical Engineering. pp. 333-338.

Baharudin, B.A. and Hussain, P. and Mustapha, M. and Ayob, F. and Ismail, A. and Ab Rahman, F. and Khalid, P.Z.M. and Hamid, D.A. and Rojan, M.A. (2020) Tensile Properties of Diffusion Bonded Duplex Stainless Steel to Low Carbon Steel. Lecture Notes in Mechanical Engineering. pp. 333-338.

Ismail, A. and Awang, M. and Rahman, F.A. and Megat Khalid, P.Z. and Baharudin, B.A. and Rojan, M.A. and Hamid, D.A. (2019) The Effects of Welding Parameters on Macro and Micro-Structure of Friction Stir Welded Aluminium. In: UNSPECIFIED.

Ismail, A. and Awang, M. and Rahman, F.A. and Megat Khalid, P.Z. and Baharudin, B.A. and Rojan, M.A. and Hamid, D.A. (2019) The Effects of Welding Parameters on Macro and Micro-Structure of Friction Stir Welded Aluminium. In: UNSPECIFIED.

Ismail, A. and Awang, M. and Rahman, F.A. and Baharudin, B.A. and Khalid, P.Z.M. and Hamid, D.A. (2018) Evaluation of the hardness distribution and fracture location in friction stir welded AA6063 pipe butt joints. Advanced Structured Materials, 85. pp. 439-444.

Ismail, A. and Awang, M. and Rahman, F.A. and Baharudin, B.A. and Khalid, P.Z.M. and Hamid, D.A. (2018) Evaluation of the hardness distribution and fracture location in friction stir welded AA6063 pipe butt joints. Advanced Structured Materials, 85. pp. 439-444.

Ismail, A. and Bhatti, M.S. and Faye, I. and Lu, C.K. and Laude, A. and Tang, T.B. (2018) Pulse waveform analysis on temporal changes in ocular blood flow due to caffeine intake: a comparative study between habitual and non-habitual groups. Graefe's Archive for Clinical and Experimental Ophthalmology. pp. 1-11.

Ismail, A. and Bhatti, M.S. and Faye, I. and Lu, C.K. and Laude, A. and Tang, T.B. (2018) Pulse waveform analysis on temporal changes in ocular blood flow due to caffeine intake: a comparative study between habitual and non-habitual groups. Graefe's Archive for Clinical and Experimental Ophthalmology. pp. 1-11.

Ismail, A. and Awang, M. and Rahman, F.A. and Baharudin, B.A. and Khalid, P.Z.M. and Hamid, D.A. and Ahmad, K. (2018) The mapping of full weld cycle heat profile for friction stir welding pipe butt joints. Advanced Structured Materials, 85. pp. 461-467.

Ismail, A. and Awang, M. and Rahman, F.A. and Baharudin, B.A. and Khalid, P.Z.M. and Hamid, D.A. and Ahmad, K. (2018) The mapping of full weld cycle heat profile for friction stir welding pipe butt joints. Advanced Structured Materials, 85. pp. 461-467.

Cheong, L.Y. and Ismail, A. and Tammam, M. and Yahya, N. (2016) Reliability of the single folding potential to describe the elastic scattering data of the p+43 Ca system. In: UNSPECIFIED.

Ismail, A. and Awang, M. and Hamid, D.A. and Ab Rahman, F. and Khalid, P.Z.M. (2016) Temperature profile and fracture location of friction stir welded AA6063-T6 pipe butt joint. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13305-13308.

Ismail, A. and Awang, M. and Rojan, M.A. and Samsudin, S.H. (2016) The characteristic of temperature curves for friction stir welding of aluminium alloy 6063-T6 pipe during tool plunging stage. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 277-280.

Ismail, A. and Lee, Y.C. and Tammam, M. (2015) Elastic scattering analysis of p+40 Ca at incident energies from threshold to 48.4 MeV and nuclear matter radius. International Journal of Modern Physics E, 24 (7).

Ismail, A. and Awang, M. (2014) Surface hardness of friction stir welded AA6063 pipe. In: UNSPECIFIED.