Items where Author is "Danish, M."

Group by: Item Type | No Grouping

Number of items: 39.

Aliyu, A.A. and Abdul-Rani, A.M. and Al-Amin, M. and Hastuty, S. and Razak, M.A. and Ali, S. and Danish, M. and Rubaiee, S. and Bin Mahfouz, A. and Hamza, A.N. (2023) Deposition of biomimetic biocompatible oxides on metallic glass surface by electro-discharge coating process Abscheidung biomimetischer biokompatibler Oxide auf metallischen GlasoberflÃ¤chen durch elektrische Entladungsbeschichtung. Materialwissenschaft und Werkstofftechnik, 54 (1). pp. 129-136.

Warsi Khan, H. and Kaif Khan, M. and Moniruzzaman, M. and Al Mesfer, M.K. and Danish, M. and Irshad, K. and Yusuf, M. and Kamyab, H. and Chelliapan, S. (2023) Evaluating ionic liquids for its potential as eco-friendly solvents for naproxen removal from water sources using COSMO-RS: Computational and experimental validation. Environmental Research, 231. ISSN 00139351

Al-Amin, M. and Danish, M. and Rubaiee, S. and Ahmed, A. and Abdul-Rani, A.M. and Mannan, A. and Yildirim, M.B. (2023) Improvement in 316L steel surface features, corrosion and biocompatibility through novel CNT-assisted hydroxyapatite powder mixed-EDM process. Applied Physics A: Materials Science and Processing, 129 (7). ISSN 09478396

Danish, M. and Al-Amin, M. and Rubaiee, S. and Gul, I.A. and Ahmed, A. and Rahman, M.O. and Zhang, C. and Yildirim, M.B. (2023) Investigation of coated 316L steel surface: Surface morphology, composition, corrosion, and biocompatibility using hydroxyapatite mixed-EDM process. Surface and Coatings Technology, 467. ISSN 02578972

Danish, M. and Al-Amin, M. and Rubaiee, S. and Abdul-Rani, A.M. and Zohura, F.T. and Ahmed, A. and Ahmed, R. and Yildirim, M.B. (2022) Enhanced machining features and multi-objective optimization of CNT mixed-EDM process for processing 316L steel. International Journal of Advanced Manufacturing Technology, 120 (9-10). pp. 6125-6141.

Al-Amin, M. and Abdul-Rani, A.M. and Rana, M. and Hastuty, S. and Danish, M. and Rubaiee, S. and Mahfouz, A.B. (2022) Evaluation of modified 316L surface properties through HAp suspended EDM process for biomedical application. Surfaces and Interfaces, 28.

Al-Amin, M. and Abdul-Rani, A.M. and Rao, T.V.V.L.N. and Danish, M. and Rubaiee, S. and Mahfouz, A.B. and Parameswari, R.P. and Wani, M.F. (2022) Investigation of machining and modified surface features of 316L steel through novel hybrid of HA/CNT added-EDM process. Materials Chemistry and Physics, 276.

Maqsood, K. and Ali, A. and Ilyas, S.U. and Garg, S. and Danish, M. and Abdulrahman, A. and Rubaiee, S. and Alsaady, M. and Hanbazazah, A.S. and Mahfouz, A.B. and Ridha, S. and Mubashir, M. and Lim, H.R. and Khoo, K.S. and Show, P.L. (2022) Multi-objective optimization of thermophysical properties of multiwalled carbon nanotubes based nanofluids. Chemosphere, 286.

Danish, M. and Al-Amin, M. and Abdul-Rani, A.M. and Rubaiee, S. and Ahmed, A. and Zohura, F.T. and Ahmed, R. and Yildirim, M.B. (2022) Optimization of hydroxyapatite powder mixed electric discharge machining process to improve modified surface features of 316L stainless steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.

Al-Amin, M. and Abdul-Rani, A.M. and Danish, M. and Zohura, F.T. and Rubaiee, S. and Ahmed, R. and Ali, S. and Sarikaya, M. (2021) Analysis of hybrid HA/CNT suspended-EDM process and multiple-objectives optimization to improve machining responses of 316L steel. Journal of Materials Research and Technology, 15. pp. 2557-2574.

Alkarkhi, A.F.M. and Danish, M. and Abu Amr, S.S. and Alqaraghuli, W.A.A. and Ayoub, M. (2021) Evaluation and mechanism of glucose production through acid hydrolysis process: Statistical approach. Biocatalysis and Agricultural Biotechnology, 36.

Zahid, I. and Ayoub, M. and Abdullah, B.B. and Mukhtar, A. and Saqib, S. and Rafiq, S. and Ullah, S. and Al-Sehemi, A.G. and Farrukh, S. and Danish, M. (2021) Glycerol Conversion to Solketal: Catalyst and Reactor Design, and Factors Affecting the Yield. ChemBioEng Reviews, 8 (3). pp. 227-238.

Al-Amin, M. and Abdul-Rani, A.M. and Danish, M. and Rubaiee, S. and Mahfouz, A.B. and Thompson, H.M. and Ali, S. and Unune, D.R. and Sulaiman, M.H. (2021) Investigation of coatings, corrosion and wear characteristics of machined biomaterials through hydroxyapatite mixed-edm process: A review. Materials, 14 (13).

Ali, A. and Ilyas, S.U. and Danish, M. and Abdulrahman, A. and Maqsood, K. and Ahmed, A. and Murshid, G. and Rubaiee, S. and Alsaady, M. and Mahfouz, A.B. and Hanbazazah, A.S. (2021) Multi-objective optimization of thermophysical properties of fâ��Al2O3 nano-dispersions in heat transfer oil. SN Applied Sciences, 3 (2).

Al-Amin, M. and Abdul-Rani, A.M. and Danish, M. and Thompson, H.M. and Abdu Aliyu, A.A. and Hastuty, S. and Zohura, F.T. and Bryant, M.G. and Rubaiee, S. and Rao, T.V.V.L.N. (2020) Assessment of PM-EDM cycle factors influence on machining responses and surface properties of biomaterials: A comprehensive review. Precision Engineering, 66. pp. 531-549.

Al-Amin, M. and Abdul Rani, A.M. and Abdu Aliyu, A.A. and Bryant, M.G. and Danish, M. and Ahmad, A. (2020) Bio-ceramic coatings adhesion and roughness of biomaterials through PM-EDM: a comprehensive review. Materials and Manufacturing Processes. pp. 1157-1180.

Danish, M. and Yasir, M. and Mia, M. and Nazir, K. and Ahmed, T. and Rani, A.M.A. (2020) High speed machining of magnesium and its alloys. Elsevier, pp. 263-282.

Zahid, I. and Ayoub, M. and Abdullah, B.B. and Nazir, M.H. and Ameen, M. and Zulqarnain and Mohd Yusoff, M.H. and Inayat, A. and Danish, M. (2020) Production of Fuel Additive Solketal via Catalytic Conversion of Biodiesel-Derived Glycerol. Industrial and Engineering Chemistry Research, 59 (48). pp. 20961-20978.

Danish, M. and Ginta, T.L. and Rani, A.M.A. and Carou, D. and Davim, J.P. and Rubaiee, S. and Ghazali, S. (2019) Investigation of surface integrity induced on AZ31C magnesium alloy turned under cryogenic and dry conditions. In: UNSPECIFIED.

Nasrullah, A. and Saad, B. and Bhat, A.H. and Khan, A.S. and Danish, M. and Isa, M.H. and Naeem, A. (2019) Mangosteen peel waste as a sustainable precursor for high surface area mesoporous activated carbon: Characterization and application for methylene blue removal. Journal of Cleaner Production, 211. pp. 1190-1200.

Nasrullah, A. and Bhat, A.H. and Naeem, A. and Isa, M.H. and Danish, M. (2018) High surface area mesoporous activated carbon-alginate beads for efficient removal of methylene blue. International Journal of Biological Macromolecules, 107. pp. 1792-1799.

Nasrullah, A. and Bhat, A.H. and Isa, M.H. and Danish, M. and Naeem, A. and Muhammad, N. and Khan, T. (2017) Efficient removal of methylene blue dye using mangosteen peel waste: Kinetics, isotherms and artificial neural network (ANN) modeling. Desalination and Water Treatment, 86. pp. 191-202.

Danish, M. and Ginta, T.L. and Habib, K. and Carou, D. and Rani, A.M.A. and Saha, B.B. (2017) Thermal analysis during turning of AZ31 magnesium alloy under dry and cryogenic conditions. International Journal of Advanced Manufacturing Technology, 91 (5-8). pp. 2855-2868.

Yasir, M. and Ginta, T.L. and Ariwahjoedi, B. and Alkali, A.U. and Danish, M. (2016) Effect of cutting speed and feed rate on surface roughness of AISI 316l SS using end-milling. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2496-2500.

Danish, M. and Ginta, T.L. and Wahjoedi, B.A. (2016) Enhanced functional properties of Mg alloys by cryogenic machining. International Journal of Applied Engineering Research, 11 (7). pp. 5055-5059.

Yasir, M. and Ginta, T.L. and Ariwahjoedi, B. and Danish, M. and Alkali, A.U. (2016) Evaluation of chips formation of AISI 316L SS using precision end-milling. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12903-12907.

Danish, M. and Ginta, T.L. and Wahjoedi, B.A. and Yasir, M. and Alkali, A.U. (2016) Investigation of the temperature distribution on the tool and workpiece during cryogenic machining of mg alloy by finite element analysis. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14259-14263.

Alkali, A.U. and Ginta, T.L. and Abdulrani, A.M. and Fawad, H. and Yasir, M. and Danish, M. (2016) Study of tool life of uncoated WC-Co insert during flame assisted machining of 316L stainless steel. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13441-13447.

Alkali, A.U. and Ginta, T.L. and Abdulrani, A.M. and Fawad, H. and Danish, M. (2016) Study on the machinability of 316L stainless steel using flame assisted machining. ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8743-8749.

Danish, M. and Ginta, T.L. and Alkali, A.U. and Yasir, M. (2016) Thermal analysis of cryogenic machining of Mg alloy using FEM. ARPN Journal of Engineering and Applied Sciences, 11 (8). pp. 5134-5138.

This list was generated on Sun Nov 24 01:21:15 2024 +08.