Items where Author is "Baharom, M.B."

Ghani, S.A.A. and Baharom, M.B. and Hassan, M.H.H. (2023) Characteristics of Dynamics Electromagnetic Force Acting on a Moving Metal Rod at Very Close Distance. Lecture Notes in Mechanical Engineering. pp. 625-634. ISSN 21954356

Baharom, M.B. and Mohammed, S.E. and Hussain, N. and Aziz, A.R.A. and Zainal, Z.E.A. and Ismael, M.A. (2023) A Study on the Effect of Structural Properties and Configuration of Low-Stiffness-Resilient-Shaft (LSRS) on Torsional Behavior. Lecture Notes in Mechanical Engineering. pp. 995-1011. ISSN 21954356

A. Aziz, A.R. and Ismael, M.A. and Zainal A., E.Z. and Mohammed, S.E. and Baharom, M.B. and Anwarudin, A.R.T. (2022) Effect of generator configuration on the free-piston motion and power generation of air-driven expander system. Alexandria Engineering Journal, 61 (4). pp. 3093-3104.

Raheem, A.T. and Aziz, A.R.A. and Zulkifli, S.A. and Baharom, M.B. and Rahem, A.T. and Ayandotun, W.B. (2022) Optimisation of operating parameters on the performance characteristics of a free piston engine linear generator fuelled by CNG�H2 blends using the response surface methodology (RSM). International Journal of Hydrogen Energy, 47 (3). pp. 1996-2016.

Albaghdadi, A.M. and Baharom, M.B. and Sualiman, S.A. (2021) Balancing and Simulation of a Double Crank-Rocker Engine Model for Optimum Reduction of Shaking Forces and Shaking Moments. Mathematical Modelling of Engineering Problems, 8 (2). pp. 237-245.

Albaghdadi, A.M. and Baharom, M.B. and Sualiman, S.A. (2021) Balancing and Simulation of a Double Crank-Rocker Engine Model for Optimum Reduction of Shaking Forces and Shaking Moments. Mathematical Modelling of Engineering Problems, 8 (2). pp. 237-245.

Dabbaghi, M.F. and Baharom, M.B. and Abdul Karim, Z.A. and A. Aziz, A.R. and Mohammed, S.E. and Zainal A., E.Z. (2021) Comparative evaluation of different heat transfer correlations on a single curved-cylinder spark ignition crank-rocker engine. Alexandria Engineering Journal, 60 (3). pp. 2963-2978.

Zainal A., E.Z. and Ismael, M.A. and Aziz, A.R.A. and Mohammed, S.E. and Baharom, M.B. and Firmansyah and Hanif Ibrahim, M. and Sahalan, M.I. and Qawiy, A. (2021) Effect of aspect ratio on frequency and power generation of a free-piston linear generator. Applied Thermal Engineering, 192.

Jamil, A. and Baharom, M.B. and A. Aziz, A.R. (2021) IC engine in-cylinder cold-flow analysis � A critical review. Alexandria Engineering Journal, 60 (3). pp. 2921-2945.

Ismael, M.A. and A. Aziz, A.R. and Mohammed, S.E. and Zainal A, E.Z. and Baharom, M.B. and Hagos, F.Y. (2021) Macroscopic and microscopic spray structure of water-in-diesel emulsions. Energy, 223.

Albaghdadi, A.M. and Baharom, M.B. and Sulaiman, S.A. (2021) Tri­planar balancing optimization of a double crank­rocker mechanism for shaking forces and shaking moments reduction. Proceedings of the Estonian Academy of Sciences, 70 (3). pp. 286-296.

Albaghdadi, A.M. and Baharom, M.B. and Sulaiman, S.A. (2021) Tri­planar balancing optimization of a double crank­rocker mechanism for shaking forces and shaking moments reduction. Proceedings of the Estonian Academy of Sciences, 70 (3). pp. 286-296.

Ullah, B. and Ovinis, M. and Baharom, M.B. and Ali, S.S.A. and Khan, B. and Javaid, M.Y. (2020) Effect of waves and current on motion control of underwater gliders. Journal of Marine Science and Technology (Japan), 25 (2). pp. 549-562.

Baharom, M.B. and Zahir, M.A. (2019) Machinery for mechanical engineers. SpringerBriefs in Applied Sciences and Technology. pp. 23-42.

Baharom, M.B. and Zahir, M.A. (2019) Machinery for mechanical engineers. SpringerBriefs in Applied Sciences and Technology. pp. 23-42.

Baharom, M.B. and Zahir, M.A. (2019) Machinery for mechanical engineers. SpringerBriefs in Applied Sciences and Technology. pp. 23-42.

Mohammed, S.E. and Baharom, M.B. and Rashid Aziz, A.A. and Zainal, E.Z.Z. (2019) Modelling of combustion characteristics of a single curved-cylinder spark-ignition crank-rocker engine. Energies, 12 (17).

Aziz, A.R.A. and Baharom, M.B. and Abidin, E.Z.Z. and Firmansyah and Mohammed, S.E. and Nadhari, W.N.A.W. and Evelyn and Jaffry, M.N.M. (2019) Principal, design and characteristics of a free piston linear generator. Springer Singapore, pp. 127-144.

Aziz, A.R.A. and Baharom, M.B. and Abidin, E.Z.Z. and Firmansyah and Mohammed, S.E. and Nadhari, W.N.A.W. and Evelyn and Jaffry, M.N.M. (2019) Principal, design and characteristics of a free piston linear generator. Springer Singapore, pp. 127-144.

Aziz, A.R.A. and Baharom, M.B. and Abidin, E.Z.Z. and Firmansyah and Mohammed, S.E. and Nadhari, W.N.A.W. and Evelyn and Jaffry, M.N.M. (2019) Principal, design and characteristics of a free piston linear generator. Springer Singapore, pp. 127-144.

Machmudah, A. and Parman, S. and Baharom, M.B. (2018) Continuous path planning of Kinematically redundant manipulator using Particle Swarm Optimization. International Journal of Advanced Computer Science and Applications, 9 (3). pp. 207-217.

Machmudah, A. and Parman, S. and Baharom, M.B. (2018) Continuous path planning of Kinematically redundant manipulator using Particle Swarm Optimization. International Journal of Advanced Computer Science and Applications, 9 (3). pp. 207-217.

Setiawan, J.D. and Baharom, M.B. and Bin Abdul Wali, M.A. (2018) Development of force feedback in steering systems for virtual driving simulator. MATEC Web of Conferences, 159.

Mohammed, S.E. and Baharom, M.B. and Aziz, A.R.A. and Zainal, A.E.Z. and Firmansyah, F. (2018) Experimental investigation of ignition timing on the performance and emission characteristics of a crank-rocker engine. International Journal of Vehicle Structures and Systems, 10 (2). pp. 146-149.

Mohammed, S.E. and Baharom, M.B. and Aziz, A.R.A. and Zainal, A.E.Z. and Firmansyah, F. (2018) Experimental investigation of ignition timing on the performance and emission characteristics of a crank-rocker engine. International Journal of Vehicle Structures and Systems, 10 (2). pp. 146-149.

Ullah, B. and Ovinis, M. and Baharom, M.B. and Ali, S.S.A. and Javaid, M.Y. (2018) Pitch and depth control of underwater glider using LQG and LQR via Kalman filter. International Journal of Vehicle Structures and Systems, 10 (2). pp. 137-141.

Ullah, B. and Ovinis, M. and Baharom, M.B. and Ali, S.S.A. and Javaid, M.Y. (2018) Pitch and depth control of underwater glider using LQG and LQR via Kalman filter. International Journal of Vehicle Structures and Systems, 10 (2). pp. 137-141.

Mohammed, S.E. and Baharom, M.B. and Aziz, A.R.A. (2017) Performance and combustion characteristics of a novel crank-rocker engine. Journal of Mechanical Science and Technology, 31 (7). pp. 3563-3571.

Mushtaq, S. and Baharom, M.B. (2016) Electromagnets arrangement for electromagnetic windshield wipers - Proposal and analysis. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 150-154.

Mushtaq, S. and Baharom, M.B. (2016) Electromagnets arrangement for electromagnetic windshield wipers - Proposal and analysis. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 150-154.

Ullah, B. and Ovinis, M. and Baharom, M.B. and Setiawan, J.D. and Ali, S.S.A. and Javaid, M.Y. (2016) Motion control strategy of an underwater glider in the presence of external disturbances. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13031-13037.

Ullah, B. and Ovinis, M. and Baharom, M.B. and Setiawan, J.D. and Ali, S.S.A. and Javaid, M.Y. (2016) Motion control strategy of an underwater glider in the presence of external disturbances. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13031-13037.

Imran, M.N. and Baharom, M.B. (2016) Simplified modelling method to predict output speed of an overrunning clutch using ADAMS/Solver subroutine. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13038-13041.

Mohammed, S.E. and Baharom, M.B. and Rashid, A. and Aziz, A. (2016) Thermodynamic analysis of a single cylinder crank-rocker engine. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12239-12246.

Mohammed, S.E. and Baharom, M.B. and Rashid, A. and Aziz, A. (2016) Thermodynamic analysis of a single cylinder crank-rocker engine. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12239-12246.

Mohammed, S.E. and Baharom, M.B. and Aziz, A.R.A. (2016) The effect of rocker ratio and connecting rod length on the performance of a crank-rocker mechanism with an extended rocker input link. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4221-4227.

Mohammed, S.E. and Baharom, M.B. and Aziz, A.R.A. (2016) The effect of rocker ratio and connecting rod length on the performance of a crank-rocker mechanism with an extended rocker input link. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4221-4227.

Maharun, M. and Baharom, M.B. and Mohd, M.S. (2015) Ride comfort simulation of a vehicle equipped with semiactive steering system. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2495-2503.

Ullah, B. and Ovinis, M. and Baharom, M.B. and Javaid, M.Y. and Izhar, S.S. (2015) Underwater gliders control strategies: A review. In: UNSPECIFIED.

Ullah, B. and Ovinis, M. and Baharom, M.B. and Javaid, M.Y. and Izhar, S.S. (2015) Underwater gliders control strategies: A review. In: UNSPECIFIED.

Mohammed, S.E. and Baharom, M.B. and Aziz, A.R.A. (2014) Estimation of counterweight for shaking force balancing of a crank-rocker mechanism. Applied Mechanics and Materials, 663. pp. 135-140.

Windarta and Baharom, M.B. (2014) Experimental prediction of wear rate on rail and wheel materials at dry sliding contact. In: UNSPECIFIED.

Mokhlis, M.M. and Baharom, M.B. (2014) Output speed prediction of an overrunning clutch for oscillatory input motion using a simplified approach. In: UNSPECIFIED.

Ismael, M.A. and Heikal, M.R. and Baharom, M.B. (2014) Spray-wall impingement of diesel-CNG dual fuel jet using schlieren imaging technique. In: UNSPECIFIED.

Parman, S. and MacHmudah, A. and Baharom, M.B. (2014) Zero distribution of system with unknown random variables case study: Avoiding collision path. In: UNSPECIFIED.

Mohammed, Salah E. and Baharom, M.B. and A. Aziz, Abdul Rashid (2012) The effects of fuel-injection timing at medium injection pressure on the engine characteristics and emissions of a CNG-DI engine fueled by a small amount of hydrogen in CNG. [Citation Index Journal]

Mokhlif, N. D. and Al-Kayiem , H. H. and Baharom, M.B. (2011) Numerical Model to Simulate Wax Crystallization in Scrapped Suface Heat Exchangers. In: IEEE Conference on Open Systems (ICOS) 2011.

Mohammed, Salah El. and Baharom, M.B. and A Aziz, A Rashid (2011) Analysis of Engine Characteristics and Emissions Fueled by In-situ mixing of Small amount of Hydrogen in CNG. [Citation Index Journal]