Items where Author is "Ali, M."

Yekeen, N. and Salampessy, S.N. and Abu Bakar, A.H. and Ali, M. and Okunade, O.A. and Musa, S.A. and Bavoh, C.B. (2023) Synthesis and pore-scale visualization studies of enhanced oil recovery mechanisms of rice straw silica nanoparticles. Journal of Petroleum Science and Engineering, 221.

Chohan, I.M. and Ahmad, A. and Sallih, N. and Bheel, N. and Ali, M. and Deifalla, A.F. (2023) A review on life cycle assessment of different pipeline materials. Results in Engineering, 19. ISSN 25901230

Naseer, H. and Gilani, S.I.U. and Al-Kayiem, H.H. and Ali, M. (2023) The transition of solar thermal energy in recent years and future directions for industrial utilization. Nova Science Publishers, Inc., pp. 189-216. ISBN 9798886977097; 9798886977097

Tao, W. and Aghaabbasi, M. and Ali, M. and Almaliki, A.H. and Zainol, R. and Almaliki, A.A. and Hussein, E.E. (2022) An Advanced Machine Learning Approach to Predicting Pedestrian Fatality Caused by Road Crashes: A Step toward Sustainable Pedestrian Safety. Sustainability (Switzerland), 14 (4).

Zhu, L. and Ali, M. and Macioszek, E. and Aghaabbasi, M. and Jan, A. (2022) Approaching Sustainable Bike-Sharing Development: A Systematic Review of the Influence of Built Environment Features on Bike-Sharing Ridership. Sustainability (Switzerland), 14 (10).

Ali, M. and Khan, M.I. and Masood, F. and Alsulami, B.T. and Bouallegue, B. and Nawaz, R. and Fediuk, R. (2022) Central composite design application in the optimization of the effect of waste foundry sand on concrete properties using RSM. Structures, 46. pp. 1581-1594.

Yekeen, N. and Al-Yaseri, A. and Negash, B.M. and Ali, M. and Giwelli, A. and Esteban, L. and Sarout, J. (2022) Clay-hydrogen and clay-cushion gas interfacial tensions: Implications for hydrogen storage. International Journal of Hydrogen Energy, 47 (44). pp. 19155-19167.

Al-Mahbashi, N. and Kutty, S.R.M. and Jagaba, A.H. and Al-Nini, A. and Ali, M. and Saeed, A.A.H. and Ghaleb, A.A.S. and Rathnayake, U. (2022) Column Study for Adsorption of Copper and Cadmium Using Activated Carbon Derived from Sewage Sludge. Advances in Civil Engineering, 2022.

Ali, M. and Tang Jung, L. and Hassan Sodhro, A. and Ali Laghari, A. and Birahim Belhaouari, S. and Gillani, Z. (2022) A Confidentiality-based data Classification-as-a-Service (C2aaS) for cloud security. Alexandria Engineering Journal.

Al-Yaseri, A. and Yekeen, N. and Ali, M. and Pal, N. and Verma, A. and Abdulelah, H. and Hoteit, H. and Sarmadivaleh, M. (2022) Effect of organic acids on CO2-rock and water-rock interfacial tension: Implications for CO2 geo-storage. Journal of Petroleum Science and Engineering, 214.

Al-Yaseri, A. and Yekeen, N. and Ali, M. and Pal, N. and Verma, A. and Abdulelah, H. and Hoteit, H. and Sarmadivaleh, M. (2022) Effect of organic acids on CO2-rock and water-rock interfacial tension: Implications for CO2 geo-storage. Journal of Petroleum Science and Engineering, 214.

Ali, M. and Abbas, S. and de Azevedo, A.R.G. and Marvila, M.T. and Alqurashi, M. and Khan, M.I. and Rafiq, W. and Hussein, E.E. (2022) Experimental and analytical investigation on the confinement behavior of low strength concrete under axial compression. Structures, 36. pp. 303-313.

Ali, M. and Habib, M.F. and Ahmed Sheikh, N. and Akhter, J. and Gilani, S.I.U.H. (2022) Experimental investigation of an integrated absorption- solid desiccant air conditioning system. Applied Thermal Engineering, 203.

Lesovik, V. and Tolstoy, A. and Fediuk, R. and Amran, M. and Azevedo, A. and Ali, M. and Ali Mosaberpanah, M. and Asaad, M.A. (2022) Four-component high-strength polymineral binders. Construction and Building Materials, 316.

Chen, Y. and Aghaabbasi, M. and Ali, M. and Anciferov, S. and Sabitov, L. and Chebotarev, S. and Nabiullina, K. and Sychev, E. and Fediuk, R. and Zainol, R. (2022) Hybrid bayesian network models to investigate the impact of built environment experience before adulthood on students� tolerable travel time to campus: Towards sustainable commute behavior. Sustainability (Switzerland), 14 (1).

Bheel, N. and keerio , M.A. and Kumar, A. and Shahzaib, J. and Ali, Z. and Ali, M. and sohu , S. (2022) An Investigation on Fresh and Hardened Properties of Concrete Blended with Rice Husk Ash as Cementitious Ingredient and Coal Bottom Ash as Sand Replacement Material. Silicon, 14 (2). pp. 677-688.

Nafees, A. and Amin, M.N. and Khan, K. and Nazir, K. and Ali, M. and Javed, M.F. and Aslam, F. and Musarat, M.A. and Vatin, N.I. (2022) Modeling of mechanical properties of silica fume-based green concrete using machine learning techniques. Polymers, 14 (1).

Masood, F. and Nor, N.B.M. and Nallagownden, P. and Elamvazuthi, I. and Saidur, R. and Alam, M.A. and Akhter, J. and Yusuf, M. and Mehmood, M. and Ali, M. (2022) A Review of Recent Developments and Applications of Compound Parabolic Concentrator-Based Hybrid Solar Photovoltaic/Thermal Collectors. Sustainability (Switzerland), 14 (9).

Amran, M. and Makul, N. and Fediuk, R. and Borovkov, A. and Ali, M. and Zeyad, A.M. (2022) A Review on Building Design as a Biomedical System for Preventing COVID-19 Pandemic. Buildings, 12 (5).

Dai, L. and Wu, X. and Zhou, M. and Ahmad, W. and Ali, M. and Sabri, M.M.S. and Salmi, A. and Ewais, D.Y.Z. (2022) Using Machine Learning Algorithms to Estimate the Compressive Property of High Strength Fiber Reinforced Concrete. Materials, 15 (13).

Farooqi, B.A. and Ahmad, M.R.B. and Ali, M. (2021) Analysis of interconnected configuration for penetration of distributed generation. International Journal of Advanced Technology and Engineering Exploration, 8 (74). pp. 1-11.

Room, S. and Ali, M. and Alam, M.A. and Khan, U. and Ammad, S. and Saad, S. (2021) Assessment of Lightweight Aggregate Concrete Using Textile Washing Stone. In: UNSPECIFIED.

Ammad, S. and Alaloul, W.S. and Saad, S. and Altaf, M. and Alawag, A.M. and Ali, M. (2021) Building Information Modelling (BIM) and Occupational Safety in Infrastructure Projects. In: UNSPECIFIED.

Abdulelah, H. and Al-Yaseri, A. and Ali, M. and Giwelli, A. and Negash, B.M. and Sarmadivaleh, M. (2021) CO2/Basalt's interfacial tension and wettability directly from gas density: Implications for Carbon Geo-sequestration. Journal of Petroleum Science and Engineering, 204.

Qian, Y. and Aghaabbasi, M. and Ali, M. and Alqurashi, M. and Salah, B. and Zainol, R. and Moeinaddini, M. and Hussein, E.E. (2021) Classification of imbalanced travel mode choice to work data using adjustable svm model. Applied Sciences (Switzerland), 11 (24).

Masood, F. and Nor, N.B.M. and Nallagownden, P. and Elamvazuthi, I. and Alam, M.A. and Yusuf, M. and Ali, M. and Akhter, J. and Mehmood, M. (2021) Dataset on the effect of receiver size and acceptance half-angle on the aperture width and height of compound parabolic concentrator for low-concentrating photovoltaic applications using RSM. Data in Brief, 39.

Masood, F. and Nallagownden, P. and Elamvazuthi, I. and Alam, M.A. and Ali, M. and Azeem, M. (2021) Design and Optical Performance Analysis of a Quasi-stationary Compound Parabolic Concentrator for Photovoltaic Applications. Lecture Notes in Mechanical Engineering. pp. 241-248.

Masood, F. and Nallagownden, P. and Elamvazuthi, I. and Alam, M.A. and Ali, M. and Azeem, M. (2021) Design and Optical Performance Analysis of a Quasi-stationary Compound Parabolic Concentrator for Photovoltaic Applications. Lecture Notes in Mechanical Engineering. pp. 241-248.

Ahmad, S. and Shafiq, N. and Iqbal, H.W. and Ahmad, R.Z. and Abbas, Z. and Rehman, A.-U. and Ali, M. (2021) Effect of slag on chloride resistance of concrete. Lecture Notes in Civil Engineering, 132. pp. 365-374.

Ahmad, S. and Shafiq, N. and Iqbal, H.W. and Ahmad, R.Z. and Abbas, Z. and Rehman, A.-U. and Ali, M. (2021) Effect of slag on chloride resistance of concrete. Lecture Notes in Civil Engineering, 132. pp. 365-374.

de Azevedo, A.R.G. and Marvila, M.T. and Ali, M. and Khan, M.I. and Masood, F. and Vieira, C.M.F. (2021) Effect of the addition and processing of glass polishing waste on the durability of geopolymeric mortars. Case Studies in Construction Materials, 15.

Ali, M. and Masood, F. and Khan, M.I. and Azeem, M. and Qasim, M. and Ali, F.N. (2021) Evaluation of flexible pavement distresses-A Case Study of Northern Bypass Peshawar, Pakistan. In: UNSPECIFIED.

Akhter, J. and Gilani, S.I. and Al-Kayiem, H.H. and Ali, M. (2021) Performance Evaluation of a Modified Compound Parabolic Concentrating Collector with Varying Concentration Ratio. Heat Transfer Engineering, 42 (13-14). pp. 1117-1131.

Memon, A.M. and Sutanto, M.H. and Napiah, M. and Yusoff, N.I.M. and Memon, R.A. and Al-Sabaeei, A.M. and Ali, M. (2021) Physicochemical, rheological and morphological properties of bitumen incorporating petroleum sludge. Construction and Building Materials, 297.

Ali, M. and Room, S. and Khan, M.I. and Masood, F. and Ali Memon, R. and Khan, R. and Memon, A.M. (2020) Assessment of local earthen bricks in perspective of physical and mechanical properties using Geographical Information System in Peshawar, Pakistan. Structures, 28. pp. 2549-2561.

Ahmad, F. and Mohammad, M. and Muhsan, A.S. and Ali, M. and Naseer, A. and Aslam, M. and Malik, M.R.R. (2020) Effect of Thermal Cycling on Thermal Conductivity of Powder Injection Moulded MWCNT Reinforced Copper Matrix Composites. Lecture Notes in Mechanical Engineering. pp. 377-387.

Ahmad, W. and Ali, M. and Sheikh, N.A. and Akhtar, J. (2020) Effect of efficient multi-stage indirect evaporative cooling on performance of solar assisted desiccant air conditioning in different climatic zones. Heat and Mass Transfer/Waerme- und Stoffuebertragung, 56 (9). pp. 2725-2741.

Ali, M. and Abbas, S. and Khan, M.I. and Anwar Gad, M. and Ammad, S. and Khan, A. (2020) Experimental Validation of Mander's Model for Low Strength Confined Concrete under Axial Compression. In: UNSPECIFIED.

Ali, M. and Abbas, S. and Khan, M.I. and Anwar Gad, M. and Ammad, S. and Khan, A. (2020) Experimental Validation of Mander's Model for Low Strength Confined Concrete under Axial Compression. In: UNSPECIFIED.

Akhter, J. and Gilani, S.I. and Al-Kayiem, H.H. and Ali, M. and Masood, F. (2020) Experimental evaluation of thermophysical properties of oil-based titania nanofluids for medium temperature solar collectors Experimentelle Einschätzung der thermophysikalischen Eigenschaften von ölbasierten Titandioxid-Nanofluiden für Mitteltemperatur-Solarkollektoren. Materialwissenschaft und Werkstofftechnik, 51 (6). pp. 792-802.

Ali, M. and Ahmad, F. and Malik, M.R.R. and Niazi, A.R. (2020) Fabrication of high magnetic performance Fe�50Ni alloy by powder injection molding. Materials and Manufacturing Processes, 35 (14). pp. 1557-1566.

Ali, M. and Ahmad, F. and Malik, M.R.R. and Niazi, A.R. (2020) Fabrication of high magnetic performance Fe�50Ni alloy by powder injection molding. Materials and Manufacturing Processes, 35 (14). pp. 1557-1566.

Ali, M. and Ahmad, F. (2020) Influence of powder loading on rheology and injection molding of Fe-50Ni feedstocks. Materials and Manufacturing Processes, 35 (5). pp. 579-589.

Bou-Rabee, M. and Lodi, K.A. and Ali, M. and Ansari, M.F. and Tariq, M. and Sulaiman, S.A. (2020) One-month-ahead wind speed forecasting using hybrid AI model for coastal locations. IEEE Access, 8. pp. 198482-198493.

Khan, M.Y. and Ali, M. and Qaisar, S. and Naeem, M. and Chrysostomou, C. and Iqbal, M. (2020) Placement Optimization for Renewable Energy Sources: Ontology, Tools, and Wake Models. IEEE Access, 8. pp. 72781-72800.

Ali, M. and Jung, L.T. and Abdel-Aty, A.-H. and Abubakar, M.Y. and Elhoseny, M. and Ali, I. (2020) Semantic-k-NN algorithm: An enhanced version of traditional k-NN algorithm. Expert Systems with Applications, 151.

Ali, M. and Jung, L.T. and Abdel-Aty, A.-H. and Abubakar, M.Y. and Elhoseny, M. and Ali, I. (2020) Semantic-k-NN algorithm: An enhanced version of traditional k-NN algorithm. Expert Systems with Applications, 151.

Gad, M.A. and Riad, A.M. and Nikbakht, E. and Ali, M. and Ghanem, G.M. (2020) Structural Behavior of Slender Reinforced Concrete Columns Wrapped with Fiber Reinforced Polymers Subjected to Eccentric Loads. In: UNSPECIFIED.

Gad, M.A. and Riad, A.M. and Nikbakht, E. and Ali, M. and Ghanem, G.M. (2020) Structural Behavior of Slender Reinforced Concrete Columns Wrapped with Fiber Reinforced Polymers Subjected to Eccentric Loads. In: UNSPECIFIED.

Ali, M. and Jung, L.T. and Hosam, O. and Wagan, A.A. and Shah, R.A. and Khayyat, M. (2020) A new text-based w-distance metric to find the perfect match between words. Journal of Intelligent and Fuzzy Systems, 38 (3). pp. 2661-2672.

Akhter, J. and Gilani, S.I. and Al-kayiem, H.H. and Ali, M. and Masood, F. (2019) Characterization and stability analysis of oil-based copper oxide nanofluids for medium temperature solar collectors Charakterisierung und Stabilitätsanalyse von ölbasierten Kupferoxid-Nanofluiden für Mitteltemperatursonnenkollektoren. Materialwissenschaft und Werkstofftechnik, 50 (3). pp. 311-319.

Ali, M. and Ahmad, F. and Melor, P.S. and Yasir, M. and Yahya, N. and Aslam, M. and Malik, M.R.R. (2019) Influence of powder loading on densification and microstructure of injection molded Fe-50Ni soft magnetic alloys Einfluss der Pulverbeladung auf die Verdichtung und das Gefüge spritzgegossener weichmagnetischer Fe-50Ni-Legierungen. Materialwissenschaft und Werkstofftechnik, 50 (3). pp. 274-282.

Akhter, J. and Gilani, S.I. and Al-Kayiem, H.H. and Ali, M. (2019) Optical performance analysis of single flow through and concentric tube receiver coupled with a modified CPC collector under different configurations. Energies, 12 (21).

Hussain, Z. and Khan, A. and Sultan, N. and Ali, M. and Naz, M.Y. and Saed, K. and Sulaiman, S.A. (2019) Thermo-chemical conversion of waste glass into non-vitreous porous material for adsorption application. Journal of Material Cycles and Waste Management.

Hussain, Z. and Khan, A. and Sultan, N. and Ali, M. and Naz, M.Y. and Saed, K. and Sulaiman, S.A. (2019) Thermo-chemical conversion of waste glass into non-vitreous porous material for adsorption application. Journal of Material Cycles and Waste Management, 21 (5). pp. 1132-1143.

Hussain, Z. and Khan, A. and Sultan, N. and Ali, M. and Naz, M.Y. and Saed, K. and Sulaiman, S.A. (2019) Thermo-chemical conversion of waste glass into non-vitreous porous material for adsorption application. Journal of Material Cycles and Waste Management, 21 (5). pp. 1132-1143.

Yasir, M. and Ahmad, F. and Melor, P.S. and Ullah, S. and Ali, M. (2019) The influence of fiber length and concentration on the thermal properties of basalt fiber reinforced intumescent coating. International Journal of Recent Technology and Engineering, 7 (6). pp. 898-901.

Ali, M. and Ahmad, F. (2019) A review of processing techniques for Fe-Ni soft magnetic materials. Materials and Manufacturing Processes, 34 (14). pp. 1580-1604.

Qadar Chaudhary, G. and Ali, M. and Sheikh, N.A. and Gilani, S.I.U.H. and Khushnood, S. (2018) Integration of solar assisted solid desiccant cooling system with efficient evaporative cooling technique for separate load handling. Applied Thermal Engineering, 140. pp. 696-706.

Qadar Chaudhary, G. and Ali, M. and Sheikh, N.A. and Gilani, S.I.U.H. and Khushnood, S. (2018) Integration of solar assisted solid desiccant cooling system with efficient evaporative cooling technique for separate load handling. Applied Thermal Engineering, 140. pp. 696-706.

Naqvi, S.R. and Jamshaid, S. and Naqvi, M. and Farooq, W. and Niazi, M.B.K. and Aman, Z. and Zubair, M. and Ali, M. and Shahbaz, M. and Inayat, A. and Afzal, W. (2018) Potential of biomass for bioenergy in Pakistan based on present case and future perspectives. Renewable and Sustainable Energy Reviews, 81. pp. 1247-1258.

Naqvi, S.R. and Jamshaid, S. and Naqvi, M. and Farooq, W. and Niazi, M.B.K. and Aman, Z. and Zubair, M. and Ali, M. and Shahbaz, M. and Inayat, A. and Afzal, W. (2018) Potential of biomass for bioenergy in Pakistan based on present case and future perspectives. Renewable and Sustainable Energy Reviews, 81. pp. 1247-1258.

Khan, A. and Ali, M. and Ilyas, A. and Naik, P. and Vankelecom, I.F.J. and Gilani, M.A. and Bilad, M.R. and Sajjad, Z. and Khan, A.L. (2018) ZIF-67 filled PDMS mixed matrix membranes for recovery of ethanol via pervaporation. Separation and Purification Technology, 206. pp. 50-58.

Khan, A. and Ali, M. and Ilyas, A. and Naik, P. and Vankelecom, I.F.J. and Gilani, M.A. and Bilad, M.R. and Sajjad, Z. and Khan, A.L. (2018) ZIF-67 filled PDMS mixed matrix membranes for recovery of ethanol via pervaporation. Separation and Purification Technology, 206. pp. 50-58.

Ali, M. and Yaacob, R.A.I.R. and Endut, M.N.A.-A. and Sulam, M. (2018) The influence of contents utility on students' use of social media. Pertanika Journal of Social Sciences and Humanities, 26 (Januar). pp. 93-110.

Ali, M. and Yaacob, R.A.I.R. and Endut, M.N.A.-A. and Sulam, M. (2018) The influence of contents utility on students' use of social media. Pertanika Journal of Social Sciences and Humanities, 26 (Januar). pp. 93-110.

Ali, M. and Yaacob, R.A.I.R. and Endut, M.N.A.-A. and Sulam, M. (2018) The influence of contents utility on students' use of social media. Pertanika Journal of Social Sciences and Humanities, 26 (Januar). pp. 93-110.

Ali, M. and Khan, S.A. and Sheikh, N.A. and Gilani, S.I.-U.-H. and Shehryar, M. and Ali, H.M. and Rashid, T.U. (2017) Performance analysis of a low capacity solar tower water heating system in climate of Pakistan. Energy and Buildings, 143. pp. 84-99.

Gilani, S.I.-U. and Khan, M.H. and Ali, M. (2016) Revisiting Fanger's thermal comfort model using mean blood pressure as a bio-marker: An experimental investigation. Applied Thermal Engineering, 109. pp. 35-43.

Gilani, S.I.-U. and Khan, M.H. and Ali, M. (2016) Revisiting Fanger's thermal comfort model using mean blood pressure as a bio-marker: An experimental investigation. Applied Thermal Engineering, 109. pp. 35-43.

Ali, M. and Jung, L.T. (2015) Confidentiality based file attributes and data classification using TsF-KNN. In: UNSPECIFIED.

Abid, S.A. and Othman, M. and Shah, N. and Sabir, O. and Khan, A.U.R. and Ali, M. and Shafi, J. and Ullah, S. (2015) Merging of DHT-based logical networks in MANETs. Transactions on Emerging Telecommunications Technologies, 26 (12). pp. 1347-1367.

Abid, S.A. and Othman, M. and Shah, N. and Sabir, O. and Khan, A.U.R. and Ali, M. and Shafi, J. and Ullah, S. (2015) Merging of DHT-based logical networks in MANETs. Transactions on Emerging Telecommunications Technologies, 26 (12). pp. 1347-1367.

Khan, H. and Daraz, N. and Khan, M.N. and Said, M. and Akhtar, N. and Badshah, A. and Khan, A.S. and Ali, M. (2014) Synthesis, Structural Characterization, and Evaluation of the Biological Properties of Heteroleptic Palladium(II) Complexes. Bioinorganic Chemistry and Applications, 2014.

Samer, A. and Ali, M. and Basu, P. and Ahmad, F. (2014) Wear resistance of Al-12Si alloys by reinforcing TiC and TiN particles. Journal of Engineering Mechanics, 140 (6).