Items where Author is "Abdul-Rani, Ahmad Majdi"

Gul, Iqtidar Ahmed and Abdul-Rani, Ahmad Majdi and Al-Amin, Md and Garba, Elhuseini (2023) Elucidating Powder-Mixed Electric Discharge Machining Process, Applicability, Trends and Futuristic Perspectives. Machines, 11 (3). p. 381.

Al-Amin, Md and Danish, Mohd and Rubaiee, Saeed and Ahmed, Anas and Abdul-Rani, Ahmad Majdi and Mannan, Abdul and Yildirim, Mehmet Bayram (2023) Improvement in 316L steel surface features, corrosion and biocompatibility through novel CNT-assisted hydroxyapatite powder mixed-EDM process. Applied Physics A, 129 (7). p. 501.

Danish, Mohd and Al-Amin, Md and Abdul-Rani, Ahmad Majdi and Rubaiee, Saeed and Ahmed, Anas and Zohura, Fatema Tuj and Ahmed, Rasel and Yildirim, Mehmet B (2023) Optimization of hydroxyapatite powder mixed electric discharge machining process to improve modified surface features of 316L stainless steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 237 (3). pp. 881-895.

Sharuddin, Muhammad Hazman bin and Sulaiman, MH and Kamaruddin, S and Dahnel, AH and Abd Halim, NFH and Ridzuan, MJM and Abdul-Rani, Ahmad Majdi (2023) Properties and tribological evaluation of graphene and fullerene nanoparticles as additives in oil lubrication. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. p. 13506501231175540.

Danish, Mohd and Al-Amin, Md and Rubaiee, Saeed and Abdul-Rani, Ahmad Majdi and Zohura, Fatema Tuj and Ahmed, Anas and Ahmed, Rasel and Yildirim, Mehmet Bayram (2022) Enhanced machining features and multi-objective optimization of CNT mixed-EDM process for processing 316L steel. The International Journal of Advanced Manufacturing Technology, 120 (9-10). pp. 6125-6141.

Al-Amin, Md and Abdul-Rani, Ahmad Majdi and Rana, Masud and Hastuty, Sri and Danish, Mohd and Rubaiee, Saeed and bin Mahfouz, Abdullah (2022) Evaluation of modified 316L surface properties through HAp suspended EDM process for biomedical application. Surfaces and Interfaces, 28. p. 101600.

Al-Amin, Md and Abdul-Rani, Ahmad Majdi and Rao, TVVLN and Danish, Mohd and Rubaiee, Saeed and bin Mahfouz, Abdullah and Parameswari, RP and Wani, MF (2022) Investigation of machining and modified surface features of 316L steel through novel hybrid of HA/CNT added-EDM process. Materials Chemistry and Physics, 276. p. 125320.

Singh, Siddhartha Kumar and Mali, Harlal Singh and Unune, Deepak Rajendra and Abdul-Rani, Ahmad Majdi and Wojciechowski, Szymon (2022) Material independent effectiveness of workpiece vibration in μ-EDM drilling. Journal of Materials Research and Technology, 18. pp. 531-546.

Danish, Mohd and Al-Amin, Md and Abdul-Rani, Ahmad Majdi and Rubaiee, Saeed and Ahmed, Anas and Zohura, Fatema Tuj and Ahmed, Rasel and Yildirim, Mehmet B (2022) Optimization of hydroxyapatite powder mixed electric discharge machining process to improve modified surface features of 316L stainless steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 09544089221111584.

Zamzuri, Afnan Nizarif Ahmad and Razak, Muhammad Al�Hapis Abdul and Abdullah, Aznizam and Ab Kadir, Ahmad Razlee and Abdul-Rani, Ahmad Majdi and Azam, Farooq I and Zaharin, Haizum Aimi (2022) Potential Experimental Analysis of Electrical Discharge Machine Process Parameters on Stainless Steel ANSI 304. In: Progress in Engineering Technology IV. Springer, pp. 15-22.

Shozib, Imtiaz Ahmed and Ahmad, Azlan and Abdul-Rani, Ahmad Majdi and Beheshti, Mohammadali and Aliyu, Abdul�Azeez Abdu (2022) A review on the corrosion resistance of electroless Ni-P based composite coatings and electrochemical corrosion testing methods. Corrosion Reviews, 40 (1). pp. 1-37.

Al-Amin, Md and Abdul-Rani, Ahmad Majdi and Danish, Mohd and Zohura, Fatema Tuj and Rubaiee, Saeed and Ahmed, Rasel and Ali, Sadaqat and Sarikaya, Murat (2021) Analysis of hybrid HA/CNT suspended-EDM process and multiple-objectives optimization to improve machining responses of 316L steel. Journal of Materials Research and Technology, 15. pp. 2557-2574.

Zain, Mohamad Zamri Md and Abdul-Rani, Ahmad Majdi and Al-Amin, Md and Khan, SF and Razak, Muhammad Al�Hapis Abdul and Sulaiman, MH and Unune, Deepak Rajendra (2021) Automotive Body in White Framing Systems Review. Jurnal Kejuruteraan, 33 (3). pp. 473-476.

Mertiya, Abhimanyu Singh and Upadhyay, Aman and Nirwan, Kaustubh and Harane, Pravin Pandit and Abdul-Rani, Ahmad Majdi and Pruncu, Catalin Iulian and Unune, Deepak Rajendra (2021) Development and investigation of an inexpensive low frequency vibration platform for enhancing the performance of electrical discharge machining process. Materials, 14 (20). p. 6192.

Al-Amin, Md and Abdul-Rani, Ahmad Majdi and Danish, Mohd and Rubaiee, Saeed and Mahfouz, Abdullah bin and Thompson, Harvey M and Ali, Sadaqat and Unune, Deepak Rajendra and Sulaiman, Mohd Hafis (2021) Investigation of coatings, corrosion and wear characteristics of machined biomaterials through hydroxyapatite mixed-EDM process: a review. Materials, 14 (13). p. 3597.

Al-Amin, Md and Abdul-Rani, Ahmad Majdi and Ahmed, Rasel and Shahid, Muhammad Umair and Zohura, Fatema Tuj and Rani, Muhammad Danial Bin Abd (2021) Multi-objective optimization of process variables for MWCNT-added electro-discharge machining of 316L steel. The International Journal of Advanced Manufacturing Technology, 115 (1-2). pp. 179-198.

Al-Amin, Md and Abdul-Rani, Ahmad Majdi and Ahmed, Rasel and Rao, TVVLN (2021) Multiple-objective optimization of hydroxyapatite-added EDM technique for processing of 316L-steel. Materials and Manufacturing Processes, 36 (10). pp. 1134-1145.